Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Skope MISA KLC1AF2M
Summary of Contents for Skope MISA KLC1AF2M
- Page 1 MISA SKOPE MISA Cool & Freezer Rooms...
- Page 2 Freephone: 1800 121 535 Fax: 1800 121 533 E-mail: misa@skope.co.nz Website: www.skope.com INSTALLATION & WARRANTY For installation and warranty enquiries please call SKOPE on 1800 121 535 MISA SKOPE MISA Cool & Freezer Rooms Installation Manual MAN10745 Rev. 6.0 Apr. 2015 ©...
-
Page 3: Table Of Contents
Door..........32 SKOPE MISA Cool & Freezer Rooms... -
Page 4: Specifications
SKOPE MISA Cool & Freezer Rooms Specifications Compliance SKOPE Industries Limited MISA cool and freezer rooms comply with the Australian and New Zealand building code, the Australian Food Safety Standard 3.2.3 (food premises and equipment) and the Australian Standard AS 4674-2004 (design, construction and fitout of food premises). - Page 5 SKOPE MISA Cool & Freezer Rooms MISA Drop-In Technical specifications** Nominal Current Temp. Supply Model capacity draw range (°C) (Volts) (Watts) (Amps)* MB7SF 1450 MB13SF 2080 MB16SF -5 to +10 2450 MB20SF 3270 MB26SF 4400 MB4NSF 1190 MB9NSF -25 to -5...
-
Page 6: Commissioning
After the room has been installed the installer must complete the MISA installation checklist found on the back page of this manual. A completed copy of the checklist must stay on site and a copy sent to SKOPE. Warranty Subject to the conditions and exclusions set out in the SKOPE Warranty Terms (http://www.skope.com/support/warranty) and provided that the... - Page 7 SKOPE Warranty Terms, the SKOPE Warranty Terms shall prevail. SKOPE's sole obligation should the products be found upon inspection by or on behalf of SKOPE not to meet the warranty is to, at SKOPE's option, repair or replace the products without charge provided that the liability of SKOPE shall in no event exceed the purchase price of the products.
-
Page 8: Preparation
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. Please contact SKOPE Customer Services for advice regarding disposal of this appliance WARNING Always disconnect the refrigeration unit from the mains power supply before cleaning or maintenance. -
Page 9: Positioning The Room
SKOPE MISA Cool & Freezer Rooms Positioning the Room Room Location Before assembling the room, decide where to position it. The room is installed from the inside so can be positioned in-place in tight spaces. Once installed, the room should not be moved. -
Page 10: Unpacking
Unpacking The room is supplied in two packs. The first pack contains all the parts required to build the room, and the second pack contains the SKOPE supplied refrigeration unit (where applicable) (Freeblock refrigeration unit pictured). It is not necessary to unpack the refrigeration unit until the room has been built. -
Page 11: Parts
SKOPE MISA Cool & Freezer Rooms Parts Standard The following parts are required for a standard room installation. Additional Room Parts parts may be required. Parts list No. Item Description Floor panel Grey/silver colour. Tread side up. Fast fit insert Used to align panels quickly and correctly. -
Page 12: Installation
SKOPE MISA Cool & Freezer Rooms Installation Tools and Materials Required The following tools and materials are required for a standard room installation. Additional tools and materials may be required. Tools list Item Description Cam lock tool Used to lock panels and panel edges together. -
Page 13: Fitting Parts Together
SKOPE MISA Cool & Freezer Rooms Fitting Parts Together Panels and edge pieces are fitted together using fast-fit inserts, panel cam locks and sealant in-between panels and end pieces. Fast-Fit Inserts Fast-fit inserts are plastic plates which slot into the edges of panels and edge pieces. -
Page 14: Room Installation
SKOPE MISA Cool & Freezer Rooms Room Installation The steps below detail installation of a standard four sided cool room. Before installing, ensure the site has been properly prepared. The room should be built in place, not moved into place after installation. - Page 15 SKOPE MISA Cool & Freezer Rooms 7. Use fast-fit inserts to align the floor panel edge pieces around the floor panel perimeter (see page 13). 8. Lock floor panel edge pieces to the floor panels with cam locks (page 13).
- Page 16 SKOPE MISA Cool & Freezer Rooms 5. Silicone and fix the back and sides (not the door front) of the U-Channel frame to the ground with concrete plugs. 6. Cut the front U-Channel frame piece into two pieces to allow for the door opening.
- Page 17 SKOPE MISA Cool & Freezer Rooms 3. Fit a second corner wall panel to create a right angle. Use fast-fit inserts to align and lock in place with wall panel cam locks. 4. Continue fitting back and side wall panels, working from the back towards the front of the room.
- Page 18 SKOPE MISA Cool & Freezer Rooms 8. Fit the front of the room. If the door panel makes up a corner, start with this. If the door panel has wall panels on either side, start from one side and work across.
- Page 19 SKOPE MISA Cool & Freezer Rooms Ceiling Rooms with large ceiling spans may require the use of ceiling hangers to Hangers support the ceiling. Ceiling hangers fit between ceiling panels and hang from either the building ceiling or from beam/s that span the cool room.
-
Page 20: Freeblock Refrigeration Unit
Freeblock Refrigeration Unit Introduction The SKOPE MISA Freeblock side mount is a wall mounted refrigeration unit which is easily positioned and locked onto the side of the room using the supplied cam lock tool. The standard opening size for the refrigeration unit is 800mm wide x 400mm high. - Page 21 SKOPE MISA Cool & Freezer Rooms The user shall protect the system from external fire hazards. If the unit is fitted with a light, the light must be disconnected or removed. Refer to “Compliance Kit” on page 25 for room lighting requirements.
- Page 22 SKOPE MISA Cool & Freezer Rooms 4. Refit the front cover. 5. Connect up the electrical components (see page 25), complete the room inspection (see page 27) and installation checklist (see back page). Main Switch The Freeblock refrigeration unit may be fitted with a main switch on top of the Freeblock condenser.
-
Page 23: Freeblock Control Panel
SKOPE MISA Cool & Freezer Rooms Freeblock Control Panel Depending on the date of manufacture, the Freeblock refrigeration unit will be fitted with an Eliwell control panel or a Touch Instrument control panel, visible on the front of the Freeblock condenser. It displays the internal cabinet temperature, and signals temperature and equipment alarms. - Page 24 SKOPE MISA Cool & Freezer Rooms Touch Refer to the diagram and table below for button identification. Instrument Control Panel ° Item Icon Function Escape button: Used for programming. Set button: Used for programming. On/Off button: Press to put the refrigeration into and out of standby.
-
Page 25: Electrics
SKOPE MISA Cool & Freezer Rooms Electrics All electrical wiring should be completed by a licenced electrician and installed in accordance with the relevant electrical wiring rules and regulations (AS/NZS 3000). Compliance Kit A compliance kit is supplied with the room and must be fitted. The kit for a standard room includes a light, a light switch, an external indicator and a bell alarm. - Page 26 SKOPE MISA Cool & Freezer Rooms Refrigeration Once the room has been assembled and the unit fitted, the refrigeration unit Unit Wiring electrical wiring can be connected. Two electrical cables exit the top of the refrigeration unit. One of these is the mains supply cable, and the other is the door switch cable.
-
Page 27: Door Switch
SKOPE MISA Cool & Freezer Rooms Door Switch The door switch must be fitted to freezer rooms and is optional on cool rooms. When fitted, the door switch turns the lights on and the evaporator fan off when the door is opened, and the lights off and evaporator fan on when the door is closed. - Page 28 SKOPE MISA Cool & Freezer Rooms Door gasket (on Door switch activator bracket inside of door) 3. Fit the door switch activator bracket to the top Top of door 10mm edge of the door, 10mm in from the inside face of the door as pictured.
- Page 29 SKOPE MISA Cool & Freezer Rooms Sliding Door Follow the procedure below to install the sliding door switch. Parts required Door switch Door switch mounting bracket To install the sliding door switch and activator bracket 1. Unscrew the door switch arm and rotate 20°...
-
Page 30: Room Inspection
SKOPE MISA Cool & Freezer Rooms Room Inspection Once the room has been assembled and the refrigeration unit fitted, inspect that the room is assembled correctly by shutting yourself inside the room. If no light filters through, the room is assembled correctly. If light does filter through, realign the panels to seal any gaps, and check that the door is correctly fitted (see page 32 for door servicing). -
Page 31: Drop-In Refrigeration Unit
18. Installation The SKOPE MISA Drop-In refrigeration unit is designed to be located on top of the cool/freezer room. Follow the instructions supplied with the Drop-In refrigeration unit. Once installed, have the Drop-In refrigeration unit commissioned by a licenced technician before initial start-up. -
Page 32: Servicing
SKOPE MISA Cool & Freezer Rooms Servicing Cleaning Room Periodically wipe the inside and outside of the room with a damp cloth. Use neutral or slightly alkaline detergent, and rinse and dry the panels after cleaning. Isolate the refrigeration unit from the power supply when cleaning around electrical components. - Page 33 SKOPE MISA Cool & Freezer Rooms Door Lock & The door lock can be adjusted to ensure the door closes and gasket seals Gasket on the door opening. If the gasket is not sealing correctly, follow the steps below to adjust the door lock as necessary.
- Page 35 The following checklist must be completed on-site by the installer after the room has been installed. A completed copy must stay on site and a copy sent to SKOPE for warranty registration - warranty@skope.co.nz. If this checklist cannot be completed due to installation issues, please contact SKOPE as soon as possible.
Need help?
Do you have a question about the MISA KLC1AF2M and is the answer not in the manual?
Questions and answers