Troubleshooting Guide - Craftsman CMCL030 Instruction Manual

English
90 DAY MOnEY BACK gUARAnTEE
If you are not completely satisfied with the performance of
your CRAFTSMAN Power Tool or Nailer for any reason, you
can return it within 90 days from the date of purchase with
a receipt for a full refund – no questions asked.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1-888-331-4569
for a free replacement.
For assistance with your product, visit our website at www.craftsman.com for a list of service centers, or call CRAFTSMAN
at 1-888-331-4569.
PROBlEM
Light will not illuminate.
Battery pack will not charge in
external charger.
Unit shuts off abruptly.
10

TROUBLESHOOTING GUIDE

BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
POssiBlE CAUsE
Battery pack not installed properly.
Battery pack not charged.
Internal componets too hot.
Cord not plugged in.
Circuit breaker is tripped.
Cord or switch is damaged.
Battery pack not inserted into charger.
Charger not plugged in.
Surrounding air temperature too hot or
too cold.
Battery pack has reached its maximum
thermal limit.
Out of charge. (To maximize the life of the
battery pack it is designed to shutoff abruptly
when the charge is depleted.)
sOlUTiOn
Check battery pack installation.
Check battery pack charging requirements.
Allow tool to cool down.
Plug tool into a working outlet.
Reset circuit breaker. (If the product repeatedly causes the circuit
breaker to trip, discontinue use immediately and have it serviced
at an authorized service center.
Have cord or switch replaced at an authorized service center.
Insert battery pack into charger until LED illuminates.
Plug charger into a working outlet. Refer to Important
Charging Notes for more details.
Move battery pack to a surrounding air temperature of above
40 °F (4,5 °C) or below 104 °F (+40 °C).
Allow battery pack to cool down.
Place on charger and allow to charge.