Advertisement
FUNCTION
FONCTION / FUNCIÓN
FLAME
FLAMME
LLAMA
HEATER
ICON
ICÔNE / ICONO
19
DESCRIPTION
DESCRIPTION/ DESCRIPCIÓN
There are 5 unique 3D flame colors that
can be selected.
®
1: Spectrafire
2: Sapphire
3: Amethyst
4: Campfire
5: Midnight Fire
AU: Auto Cycle will seamlessly cycle
through the above flame colors.
00: Off
Il y a 5 effets 3D unique Spectrafire qui
peuvent être sélectionnés.
®
1: Spectrafire
2: Saphir
3: Améthyste
4: Feu de camp
5: Feu de nuit
AU : Cycle automatique qui fera
automatiquement un fondu d'un
nouvel effet de couleur de flamme
périodiquement.
00: ÉTEINDRE
Hay 5 únicos efectos de 3D llama
Spectrafire que se pueden seleccionar.
®
1: Spectrafire
2: Zafiro
3: Amatista
4: Hoguera
5: Fuego de Medianoche
AU: Ciclo automático que cambiará
automáticamente por otro nuevo
efecto de la llama de color
periódicamente.
00: APAGAR
Press the heater button to turn on/
off the heater setting and adjust
the heater setting.
The thermostat setting range
is 17° - 27°C (62° - 82°F) or
continuously ON. Set the heater to
(00) to use the flame effects
without the heat.
The thermostat is adjustable
by 1°C or 2°F increments.
To change between °F and °C,
press and hold the HEATER button
on the control panel for 3 seconds.
42MM3996REV.1
Advertisement
Need help?
Do you have a question about the ClassicFlame 42ММ3996 and is the answer not in the manual?
Questions and answers
what is the amp for the fireplace.
The amp rating for the Tresanti ClassicFlame 42MM3996 fireplace is 12.5 Amps (12.5A).
This answer is automatically generated
no heat coming out
The thermostat setting may be preventing the heater from turning on. Adjust the temperature settings to ensure that the thermostat is set higher than the current room temperature.
This answer is automatically generated
Where can I purchase a replacement remote for my Mayson model?