Lepu Medical LFR30B Installation And Use Manual
  1. Manuals
  2. Brands
  3. Lepu Medical Manuals
  4. Thermometer
  5. LFR30B
  6. Installation and use manual

Lepu Medical LFR30B Installation And Use Manual

Hide thumbs Also See for LFR30B:

Advertisement

Table of Contents

Shenzhen LEPU Intelligent Medical Equipment Co., Ltd.
1.1 Check
Please check the packing case carefully before unpacking. In case of any damage found,
please contact the carrier immediately. Open the package correctly, take out the infrared forehead
thermometer and other components from the case with care, and check them one by one against
the packing list.
When the equipment is moved a different environment, the difference in temperature or
humidity may lead to condensation to it, in which case no use is allowed before condensation
disappears.
1.2 Product photo
1.3 Display screen
1
Object mode symbol
2
Temperature display
value
3
Sound switch symbol
4
Body mode symbol
Form No.: LP-QR-RD-016 REV.01
Installation and Use
5
Unit symbol
6
Mnemonic symbol
7
Low battery symbol
8
Decimal point
Page 1of 7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LFR30B and is the answer not in the manual?

Questions and answers

Related Manuals for Lepu Medical LFR30B

Summary of Contents for Lepu Medical LFR30B

  • Page 1 Shenzhen LEPU Intelligent Medical Equipment Co., Ltd. Installation and Use 1.1 Check Please check the packing case carefully before unpacking. In case of any damage found, please contact the carrier immediately. Open the package correctly, take out the infrared forehead thermometer and other components from the case with care, and check them one by one against the packing list.

  • Page 2: Install Or Replace Batteries

    Shenzhen LEPU Intelligent Medical Equipment Co., Ltd. 1.4 Install or replace batteries The first step after unpacking is to install the battery. The battery holder is on the back of the infrared forehead thermometer. The battery installation steps are as follows: (1) Open the battery cover.

  • Page 3: Body Temperature Measurement

    Shenzhen LEPU Intelligent Medical Equipment Co., Ltd. 1.9 Sound switch settings In shutdown mode, press and hold the button "MEM”, it first displays “---- M”, which flashes along with the symbol "M"; press and hold the memory button for more than 4 seconds, it displays “---- C + human icon + sound icon";...

  • Page 4: Memory Deletion

    Shenzhen LEPU Intelligent Medical Equipment Co., Ltd. when a "bi" is heard about 1S later (no “bi” heard if the sound is disabled), it means that the surface temperature has been measured, with the result displayed on the LCD screen. Note: When the measured temperature is ＜...

  • Page 5: Troubleshooting

    Shenzhen LEPU Intelligent Medical Equipment Co., Ltd. Troubleshooting The infrared forehead thermometer has been calibrated before delivery from the factory. If you have any doubt about its accuracy, please contact the after-sales service. We recommend technical inspection for the measurement every two years, and it is required to comply with the applicable national regulations of the local place.

  • Page 6: Other Error Messages

    Shenzhen LEPU Intelligent Medical Equipment Co., Ltd. The ambient temperature is Move to another warm room lower than 5°C The ambient temperature is Move to another cold room higher than 40°C 1.19 Other error messages Error message on screen Meaning of show Possible causes and solutions Eeprom error Please contact the after-sales service.

  • Page 7: Warranty Service

    Shenzhen LEPU Intelligent Medical Equipment Co., Ltd. Warranty Service The warranty period of the product is 2 years from the date of sale (see the package for manufacturing date). Any damage caused by improper use, battery leakage, failure to operate in accordance with the requirements or transfer of the thermometer to other users is out of warranty.

Table of Contents

Save PDF