Nokia RH-37 Series Disassembly Instructions Manual
Transceivers
Hide thumbs
Also See for RH-37 Series:
- Service software and tuning instructions (72 pages) ,
- Manual (70 pages) ,
- Rf troubleshooting instructions (52 pages)
Related Manuals for Nokia RH-37 Series
Summary of Contents for Nokia RH-37 Series
- Page 1 Nokia Customer Care RH-37 Series Transceivers 5 - Disassembly Instructions 2004 Nokia Corporation Issue 1 07/04 Page 1 Company Confidential...
- Page 2 RH-37 5 - Disassembly Instructions Nokia Customer Care [This page left intentionally blank] Nokia Corporation Page 2 Issue 1 07/04...
-
Page 3: Table Of Contents
RH-37 Nokia Customer Care 5 - Disassembly Instructions Table of Contents Page No Disassembly Instructions ........................5 General requirements .......................... 5 Detailed disassembly instructions ....................6 Dome Sheet Placement........................11 Cleaning ..............................11 Placing the dome sheet to the light guide ..................11 Placing the light guide assembly onto the PWB ...............13... - Page 4 RH-37 5 - Disassembly Instructions Nokia Customer Care [This page left intentionally blank] Nokia Corporation Page 4 Issue 1 07/04...
-
Page 5: Disassembly Instructions
RH-37 Nokia Customer Care 5 - Disassembly Instructions Disassembly Instructions General requirements Use the correct ESD protection before handling the RH-37 product. Use gloves to handle the RH-37 product. Required tools: • torx 6 screwdriver, for disassembly • torx 6 torque-driver, set to 28Ncm torque for reassembly •... -
Page 6: Detailed Disassembly Instructions
RH-37 5 - Disassembly Instructions Nokia Customer Care Detailed disassembly instructions Protect the Window with a plastic film. Needed tools for disassembly. Press the C-Cover Lock before pulling the C-Cover. Protect the Camera Window with a plastic film. Lift the topside of the A-Cover and then remove it care- Also protect the inner side of A-Cover with a plastic film. - Page 7 RH-37 Nokia Customer Care 5 - Disassembly Instructions Remove Keymat. ® Unscrew the six Torx Plus size 6 screws. For assembly, the ® reverse order and a Torx Plus driver with a torque of 28Ncm has to be used. Separate the Modules from B-Cover.
- Page 8 RH-37 5 - Disassembly Instructions Nokia Customer Care When changing the Light Guide Assy use SRT-6 as a lever. Put the Engine Module into the Soldering Jig. Keep in mind that Dome Sheet is glued to the Engine Module. Use a slotted screwdriver as a lever to open the Camera Camera Module is attached with four double snaps into its Shield.
- Page 9 RH-37 Nokia Customer Care 5 - Disassembly Instructions All Gel Grips are attached to the B-Cover with hooks. The numeric characters of the Grips are for place identifi- Slide the Gel Grip as shown in the picture to unlock the cation only.
- Page 10 RH-37 5 - Disassembly Instructions Nokia Customer Care The parts drop out easily. IHF Speaker can be removed with tweezers. Note the guid- ing pin while re-assembling. Push out the Blind Plug by using a screwdriver. Note: If a new B-cover is used, a torque setting of 28Ncm and speed in the range of 400 - 600 rpm is required to cut the new thread.
-
Page 11: Dome Sheet Placement
RH-37 Nokia Customer Care 5 - Disassembly Instructions Dome Sheet Placement Since the dome sheet has to be removed before every soldering process a new dome sheet needs to be placed between the PWM and light guide. Note: In some regions the lightguide assembly (which includes the lightguide,the metalframe and the domesheet) will be replaced as one part (this is the preferred procedure). - Page 12 RH-37 5 - Disassembly Instructions Nokia Customer Care Place the dome sheet onto the cleaned light guide and press them firmly together. Take care, that the holes of the domesheet align exactly with the holes on the light- guide. Nokia Corporation...
-
Page 13: Placing The Light Guide Assembly Onto The Pwb
RH-37 Nokia Customer Care 5 - Disassembly Instructions Placing the light guide assembly onto the PWB In some regions there is the possibility to order the light guide assembly including the dome sheet. In any case the protecting foil needs to be carefully removed from the dome sheet. - Page 14 RH-37 5 - Disassembly Instructions Nokia Customer Care [This page left intentionally blank] Nokia Corporation Page 14 Issue 1 07/04...