Push Transceiver Module To Separate Module From Grip; Protective Tape Disassembly From Grip - Nokia NHL-2NA Series Disassembly Instructions Manual

CCS Technical Documentation

Push transceiver module to separate module from grip

Be careful when sliding transceiver away from grip module, preventing damage to flex
assembly.
Attention:
Be very careful not to
break the flex!
Solder joints to main
PWB.

Protective tape disassembly from grip

1 Take with tweezers protective tape from one corner and drag the tape away.
2 At the same time do hold the connector at its place with other hand, preventing-
connector to be damaged.
Issue 1 07/02 ãNokia Corporation
NHL-2NA
Page 3