1.1. Retention of documents use. 1.2. Symbols used SEEBACHER cannot accept any liability for damage or malfunctions resulting from failure to observe these instructions. 2. Safety instructions 1.1. Retention of documents These instructions and all other applicable documents are part 2.1.
• When operating in explosive areas, sparking can lead to defla- ons. SEEBACHER shall not be liable for any costs or damage gration, fire or explosions. incurred by the user or third parties as a result of the use of this equipment, in particular improper use of the equipment, misuse 2.3.
Switch off the power supply, check that there is no voltage, secure against being switched on again! The device may only be operated at voltages according to the tech- Seebacher GmbH nical data and loaded with the currents defined therein. Only use Marktstrasse 57 suitable equipment (system modules).
• 1 connection for the subnet (BUS A and B, RS-485) • 2 connections for the operating voltage (Ub, 0V) • 2 connections for external contacts such as motion sensors, presence sensors, buttons, etc. Seebacher GmbH www.seebacher.de Phone: +49 (0) 80 41 / 77 77 6 Marktstrasse 57, 83646 Bad Tölz...
Need help?
Do you have a question about the ISYGLT LSR-02 and is the answer not in the manual?
Questions and answers