Rowan Astronomy AZ100 Manual page 5

Connecting Nexus DSC with SkySafari with Wi-fi
Seup the AZ100 with the Nexus DSC and turn on the Nexus DSC.
On your smart device go the the Wi-fi settings and in the list of available Wi-fi connections, select the Nexus
DSC Wi-fi.
Ignore the warning indicating limited or no internet connection and connect to the Nexus.
Open the SkySafari application on your smart device.
Click the Settings Icon at the bottom of the screen and scroll down the settings page to Telescope Setup.
Open the Telescope settings page and enter the settings as shown in the table below.
You may need to close and re-start SkySafari when changing the setting above.
When SkySafari is started it now connects to the Nexus DSC and the cross hair should sync with the telescope
pointing position. When the telescope is moved the cross hair will follow the telescopes position
You can then scroll around the planetarium and select objects. Clicking Goto at the bottom of the SkySafari
screen will send the new object co-ordinates to the Nexus DSC. The Nexus DSC will then indicate the direction
and angle to move the telescope to acquire the new object.
For further information or advice about using or adjusting the AZ100 please e-mail Rowan Astronomy at
sales@rowanastronomy.com or contact us on our office number +44 (0) 1295 251188
A .pdf version of this instruction sheet with higher resolution photos is available in the support section of
www.rowanastronomy.com
www.rowanastronomy.com
5
©
01/12/2019 2019 Copyright Rowan Engineering Ltd. Page