RSI VIDEO TECHNOLOGIES videofied CMA200 Installation Datasheet

Indicator LED
Special Arming
Mode 1 and
Special Arming
Mode 2
Direction
arrows
Capital / Small
letter
Panic button
1. Arming and Disarming
The keypad becomes inactive after 30 seconds of inactivity. To
revive the keypad you can press any key on the keypad. The
best button to press is the [YES] key because it will not trigger
an action.
Arming Fully Armed
Keys of the
Keypad
Disarming Fully Armed
Keys of the
+ Code +
Keypad
CMA means CMA600 for USA/Canada, CMA700 for Australia/
Singapore and CMA200 for Europe and rest of the world.
Made by RSI VIDEO TECHNOLOGIES
Code + +
I N S T A L L A T I O N D A T A S H E E T
Display : 2 lines with 16 characters
Perimeter
The alarm panel must be put in "Recording device
Programming mode", and the keypad must display "PRESS
Buttons PROGRAM BUTTON OF DEVICE".
1
2
To change from one arming mode to another, you have to
to fully disarm the system.
Special Mode 1 or 2
or + Code +
Special Mode 1 or 2
+ Code +
Keypad CMA
Recording of a keypad
Insert the 3 batteries Lithium LS14500 (the
3 batteries are inserted in the same
direction)
Press simultaneously on [CLR] and
[ESC NO] of the keypad until the indicator
of the keypad flashes a nd release
(possibility of testing the RF range).
Perimeter
+ + Code +
Perimeter
+ Code +
www.videofied.com