Page 1
Customer Service: 800-537-8484 Online: www.frontgate.com PRODUCT NAME:LOREN MIRRORED STORAGE CABINET ITEM NUMBER:163359 DIMENSIONS OF ITEM ASSEMBLED: 82”H x 48 1/8”W X 8 3/4”D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. UPDATE: 12/07/2018 Page 1 of 6...
163359 A 163359 B Hardware Located Here (A-D) TOOLS NEEDED: NOTE: When unpacking, lay the parts on -Requires a screwdriver. a padded surface such as the packaging provided. -Power drill suggested. Be sure to locate all hardware before throwing -Assembly requires 2 or more people. away any packaging.
Page 3
STEP 1: Place the Shelf Supports (A) at the pre-drill holes and lay the Glass Shelf (E) on the Shelf Supports (A).Put the on the glass Shelf (E). Neck Forms (F) STEP 2: If the Mirrored Storage Cabinet are uneven, adjust the levelers on the bottom. Page 3 of 6...
Page 4
STEP 3: Center the Cabinet in front of two Studs and mark the Wall. Push the Cabinet against the Wall. STEP 4: Slide the L-Brackets (D) over the top corner of the Cabinet Top in front of the previously marked Stud and mark the Wall at the top of the L-Brackets (D) .
Page 5
STEP 5: Pull the Cabinet away from the Wall and attach the L-Brackets (D) to the Studs using the Long Screws (B). STEP 6: Slide the Cabinet underneath the previously installed L-Brackets (D) and use 2 or more of the Small Screws (C) to attach the L-Brackets (D) to the Cabinet. NOTE: The L-Brackets (D) may not be completely on the Cabinet’s Top due to the Wall’s base molding.
Page 6
Cleaning & Care:To clean, wipe the Fixture with a soft, dry cloth.Avoid the use of harsh or abrasivechemicals as they may damage the finish. Frontgate: Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484 or email ps@frontgate.com.
Need help?
Do you have a question about the LOREN 163359 and is the answer not in the manual?
Questions and answers