Specifications - Panasonic AJ-YA93 Operating Instructions Manual

10.
Slide the top panel toward the rear panel, and
attach it using the two screws.
Screws
11.
Check the installation.
Turn on the power of the
AJ-SD93, and press the
INPUT SELECT VIDEO
button on the front panel.
If the board has been
installed properly, the
display will change from
[Y PB PR] (component
input) →
[CMPST]
(composite input) by
pressing the button
several times.
If the [Y PB PR] and [CMPST] displays do not
appear, the board may not have been installed
properly. Install it again properly.
E-7
Top panel
EJECT
POWER
ON
OFF
CONTROL REC INHIBIT
LOCAL REMOTE OFF ON Digital Video Cassette Recorder AJ-
METER PUSH
FULL/FINE
SHTL/SLOW
PLAY REC
SEARCH
MONITOR SEL
REW STOP FF
HEADPHONES TCG SUPER
CH 1 CH 2 CH 3 CH 4 INPUT SELECT TC INT
REC PB COUNTER RESET PRESET MENU
VIDEO AUDIO REGEN ON
PRESET
OFF
EXT
UNITY PF PF1 PF2 PF3 DIAG
INPUT SELECT
VIDEO AUDIO

Specifications

(Refer to the Operating Instructions of the AJ-SD93
main unit as well.)
Dimensions, weight :
Optional board : 165 (W) x 115 (H) x 15 (D) mm,
113 g
(6 1/2 x 4 17/32 x 19/32 inches,
0.25 lb)
Terminal board : 133 (W) x 123 (H) x 33 (D) mm,
370 g
(5 1/4 x 4 27/32 x 1 5/16 inches,
0.81 lb)
Analog video input :
BNC x 3 (used for both composite and component
signals)
Analog video output :
BNC x 3 (used for both composite and component
signals)
Analog audio input : XLR x 4
Analog audio output : XLR x 4
REF input :
BNC x 1; loop-through : BNC x 1
TC input : BNC x 1
TC output : BNC x 1
REMOTE connector : RS-422A, D-sub 9-pin x 1
E-8