Renson Healthbox 3.0 Manual page 47

en Healthbox
• Activating the Wi-Fi dongle:
– Plug Wi-Fi dongle into SmartConnect
– Switch on the device and wait approximately 1 minute
– Healthbox 3.0 automatically opens itself for 4 hours to connect to the installer app. Pressing
the button again ends the opening process to connect.
After the 4 hours have elapsed, Healthbox 3.0 can be reactivated for 4 hours by pressing a fine
object into the corresponding hole.
• Reset the Wi-Fi dongle
Long press (between 5 and 10 seconds) on the button in the hole.
— > Disconnect the link to the home network (Wi-Fi) and/or installer app. Activation can then be
used to reconnect to an (other) Wi-Fi home network (section 3.1.2.2) or the installer app.
Resetting may be necessary in the following circumstances:
– Connecting the Healthbox 3.0 to another network
– Password of the home network changes
– Healthbox 3.0 can no longer connect to the installer app or home network
142
3.0
®