The NextLight Control Pro enables Dim-to-Off, Dimming Control and Programming for NextLight Pro Series products. Designed for controlling NextLight Pro Series fixtures. The NextLight Control Pro can control up to 500 NextLight Pro Series fixtures per controller (250 fixtures per channel).
*Dust caps removed to show ports 4. Product Installation • The NextLight Control Pro can be mounted to the wall using two nails/screws and • Insert other end of Control Cable into Dim In connection on Driver of first Fixture in mounting holes (3 3/8”...
5. Temperature Sensor 6. Main Screen *Example values shown WARNING: If the sensor becomes less sensitive or oxidized, it will cause the temperature on controller to be different from actual ambient temperature. If this occurs, Temperature Date/Time you will need to calibrate the sensor (H. Temp Calibrate). Ambient temperature detected by Current date and time of controller.
8. Settings *Example values shown for all screen Settings Settings Menu B. Output Power D. Auto-Save Temp Press Enter to view Settings Menu OUTPUT SELECT OUTPUT SELECT OUTPUT POWER AUTO-SAVE TEMP Output Select AUTO AUTO CH-A: 90.0°F Output Power CH-B: Light Timer Auto-Save Temp Set Output Power % for Channels A &...
Page 6
8. Settings (cont.) F. Rise/Fall H. Temp Calibrate I. Factory Reset OUTPUT SELECT SET RAMP TIME OUTPUT SELECT TEMP CALIBRATE OUTPUT SELECT FACTORY RESET AUTO 30 MIN AUTO 80.0°F AUTO Set time period for sunrise and sunset Set Temperature Sensor calibration Set controller to original factory settings •...
(including insect foggers). This product is for horticulture use only. • If the surface of the NextLight Control Pro is dirty, wipe it with a dry towel. Not suitable for room illumination. 10. NextLight Support Legal Disclaimer NextLight products are to be used for lawful purposes only.
Need help?
Do you have a question about the Pro Series and is the answer not in the manual?
Questions and answers