Advertisement
Advertisement
Related Manuals for Erbauer EBS950
Summary of Contents for Erbauer EBS950
- Page 1 EAN: 3663602796565 EBS950 ORIGINAL INSTRUCTIONS...
-
Page 2: Table Of Contents
Safety instructions Product description Assembly Care & maintenance Guarantee Declaration of conformity 950W BeltSander MNL_EBS950_TPS_GB_V1_V20518_20180607.indd 2 6/7/18 10:23 AM... - Page 3 WARNING! Please read all safety warnings carefully and be sure that they are fully understood before handling the tool. 950W BeltSander MNL_EBS950_TPS_GB_V1_V20518_20180607.indd 3 6/7/18 10:23 AM...
- Page 4 Product description 950W BeltSander MNL_EBS950_TPS_GB_V1_V20518_20180607.indd 4 6/7/18 10:23 AM...
- Page 5 950W BeltSander MNL_EBS950_TPS_GB_V1_V20518_20180607.indd 5 6/7/18 10:23 AM...
-
Page 6: Safety Instructions
Safety instructions GENERAL POWER TOOL SAFETY WARNING WARNING! Read safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. - Page 7 b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Page 8 c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
- Page 9 c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Page 10 SAFETY WARNINGS FOR BELT SANDER a) Hold the power tool by insulated gripping surfaces, because the sanding surface may contact its own cord. Cutting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
- Page 11 h) Keep the handles dry to ensure safe control. Grip the product securely with two hands so you have full control at all times. i) Ensure that the air vents are always unobstructed and clear. Clean them if necessary with a soft brush. Blocked air vents may lead to overheating and damage the product.
- Page 12 • lung cancer • Silicosis • Chronic obstructive pulmonary disease (COPD). And breathing in fine particles of wood dust can lead to the development of Asthma. The risk of lung disease is linked to people who regularly breathe construction dust over a period of time, not on the odd occasion.
- Page 13 WARNING! Some dust particles created by power sanding, sawing, grinding, drill and other construction jobs contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks and cement and other masonry products.
- Page 14 SEE TECHNICAL SPECIFICATIONS IN THE INSTRUCTION MANUAL FOR THE VIBRATION LEVELS OF YOUR TOOL. The declared vibration emission value should be used as a minimum level and should be used with the current guidance on vibration. Calculating the actual period of use can be difficult and the HSE website has further information.
- Page 15 WARNING! Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
- Page 16 3. Use correct attachments for the product and ensure they are in good condition. 4. Keep tight grip on the handles/grip surface. 5. Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate). 6. Plan your work schedule to spread any high vibration tool use across a longer period of time.
-
Page 17: Product Description
Product description Part index The index below refers to Fig. 1 on page 4. 1. Front handle 8. Speed dial 2. Lock-on button 9. Sanding belt 3. Main handle 10. Clamping lever for sanding belt 4. On/Off switch 11. Dust extraction adapter 5. - Page 18 The sound emission values have been obtained according to the noise test code given in EN 62841-1 and EN 62841-2-4. The noise for the operator may exceed 80 dB(A) and ear protection measures are necessary. Rating label explanation EBS950 = Model number E = Erbauer BS = Belt sander 950 = Power (Watts) 950W BeltSander MNL_EBS950_TPS_GB_V1_V20518_20180607.indd 18...
-
Page 19: Assembly
Assembly Unpacking 1. Unpack all parts and lay them on a flat, stable surface. 2. Remove all packing materials and shipping devices, if applicable. 3. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer. - Page 20 Sanding belt Choosing the right sanding belt Sanding belts are available with different grain sizes (grit). The grain size is indicated with a number on the reverse of the sanding belt, the higher the number the finer is the grain size. Grain size Class Application 40-60...
- Page 21 Dust bag 1. Attach the dust bag (12) to the dust extraction outlet (7) (Fig. E). 2. To remove the dust bag (12), just pull it out. WARNING! Attach the dust bag or a dust extraction device when using this product to sand wood in order to keep the working area clean! Wear a dust mask when operating this product! Dust can be harmful to health! Especially dust and chips of wood that has been treated, e.g.
-
Page 22: Use
Intended use This product is intended for sanding the following materials: wood, plastic, metal, fillers as well as varnished surfaces. This product should not be used on other materials or those harmful to health. It is to be used for dry operation only without water or other cooling liquids. - Page 23 Operation General • Only use suitable sanding belts in terms of application and size. The sanding removal rate and the surface quality are mainly determined by the selection of the sanding belt as well as by belt speed. The higher the belt speed, the more material is removed and the finer the sanded surface.
-
Page 24: Care & Maintenance
Care & maintenance WARNING! Always switch the product off, disconnect the product from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! Only perform care and maintenance work according to these instructions! All further works must be performed by a qualified specialist! Clean 1. - Page 25 UK plug (only for UK market) Replacement of the plug shall always be carried out by the manufacturer of the tool or his service organization and follow the instructions below. IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue –...
- Page 26 Transportation WARNING! Always carry the product by its main handle. Never use the cord for carrying the product. 1. Switch the product off and disconnect it from the power supply. 2. Always carry the product by its rear handle. 3. Protect the product from any heavy impact or strong vibrations which may occur during transportation in vehicles.
-
Page 27: Guarantee
Guarantee At Erbauer we take special care to select high quality materials and use manufacturing techniques that allow us to create ranges of products incorporating design and that they can provide regular, sustained daily use during the period covered. That’s why we offer a 2 year guarantee against manufacturing defects on our Erbauer power tool products. -
Page 28: Declaration Of Conformity
London W2 6PX United Kingdom Declare that the product 950W Belt sander EBS950 Serial number: from 000001 to 999999 Complies with the essential health and safety requirements of the following directives: 2006/42/EC The Machinery Directive References to the following harmonized standard were made:... - Page 29 Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands Declare that the product 950W Belt sander EBS950 Serial number: from 000001 to 999999 Complies with the essential health and safety requirements of the following directives: 2006/42/EC The Machinery Directive References to the following harmonized standard were made:...
- Page 32 Manufacturer • Fabricant • Producent • Producator • Fabricante: Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom www.kingfisher.com/products Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands Distributor: www.diy.com www.screwfix.com www.screwfix.ie To view instruction manuals online, visit www.kingfisher.com/products...
Need help?
Do you have a question about the EBS950 and is the answer not in the manual?
Questions and answers