Download Print this page
Atoll Electronique AM200 Signature Owner's Manual

Atoll Electronique AM200 Signature Owner's Manual

Stereo power amplifier

Advertisement

Quick Links

C
:
ONNECTING
Rear view of appliance:
4
1) Ampli IN (double pair)
2) General power plug and ON/OFF button (with internal fuse)
3) Left channel Output
4) Right channel Output
5) Trigger Input: This input allows the control ON/OFF of your amplifier
simultaneously to any device with a 12V trigger outlet. In order that the
system is operating, the ON/OFF button of your AM200 must remain in
position OFF (position (0)). If the switch is in the ON position (I), the
amplifier will work but not the Trigger function.
Trigger cable must be a Male to Male STEREO jack plug 3.5mm (1/8")
D
:
ETAILS OF FUNCTIONS
Front view of Amplifier:
6) Power indicator led.
1
2
3
6
A
:
DVISES
- To optimise the performances of your amplifier, you should switch it on
at least half an hour before any listening, the time for power stage to
reach their ideal working temperature. Between two utilisation, it's better
to use the stand-by position, so that the power stages remains at their
optimal temperatures.
- We advise you to use good wires to link with the other elements
(Preamplifier, Loudspeakers...). Don't hesitate to take advise from your
dealer.
- Your Amplifier is equipped with a temporised switch on. A relay protect
5
loudspeakers on output power stage from over-voltage.
MODE BRIDGE MONO
To transform your Power Amplifier from Stereo to mono, you have to push the
switch (a) placed inside the appliance as shown below:
Careful: be sure that your
amplifier is unplugged and
that no other appliance is
plug
in
operation.
E.C. M
ARKING
E.C. marking certified the conformity with low tension directive
73/23/CEE, directive CEM 89/336/CEE and national transpositions.
G
UARANTEE
The guarantee is two years long from date of purchase. We recommend
you to ask your dealer to fill the guarantee and to conserve it. The
guarantee is only available for appliance which have been use correctly.
C
LEANING
Before any cleaning, switch off your amplifier (6). Use a soft and dry rag to
clean up the appliance. Never use acetone, white-spirit, ammoniac, or any
kind of product containing abrasive agent. Never try to clean up inside the
appliance.
(a)
during
this
:
:
:
(a
)

Advertisement

loading
Need help?

Need help?

Do you have a question about the AM200 Signature and is the answer not in the manual?

Questions and answers

Summary of Contents for Atoll Electronique AM200 Signature

  • Page 1 ONNECTING DVISES Rear view of appliance: - To optimise the performances of your amplifier, you should switch it on at least half an hour before any listening, the time for power stage to reach their ideal working temperature. Between two utilisation, it's better to use the stand-by position, so that the power stages remains at their optimal temperatures.
  • Page 2 220 kohms Sensitivity : 1,8 V You will find enclosed: Rate Signal/Noise : 100 dB Distortion at 1kHz : 0,005% - a power amplifier AM200 Signature ; Frequency Response : 5Hz-200kHz - one powerlead; Rise Time : 1,5µs Dimensions : 440*90*280mm - this manual with the certificate of guarantee.
  • Page 3 Stereo Power Amplifier  AM200 Signature G U A R A N T E E To present to your dealer with the invoice when returning back the appliance: Model AM200 Signature ® ATOLL ELECTRONIQUE Bd des Merisiers 50370 BRECEY FRANCE...