Safety Warnings; Save All Warnings And Instruc- Tions For Future Reference; Ec Declaration Of Conformity - Makita DLM460 Instruction Manual

NOTE: T h e d e c lare d noise emission v alue ( s ) h as
been measure d in a c c or d an c e w it h a stan d ar d test
method and may be used for comparing one tool with
anot h er.
NOTE: T h e d e c lare d noise emission v alue ( s )
may also be used in a preliminary assessment of
e x posure.
WARNING:
W ear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
T h e v ibration total v alue ( tri-a x ial v e c tor sum ) d eter-
mine d a c c or d ing to EN 6 033 5 -2-77 :
Model DLM460
Vibration emission ( a ) : 2. 5 m / s
h
Uncertainty (K) : 1. m/s
NOTE: T h e d e c lare d v ibration total v alue ( s ) h as been
measure d in a c c or d an c e w it h a stan d ar d test met h o d
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).

EC Declaration of Conformity

For European countries only
The EC declaration of conformity is included as Annex A
to t h is instru c tion manual.
2
or less
2
SAFETY W ARNINGS
Lawn Mower Safety Instructions
WARNING:
Read all safety warnings and
all instructions. F ailure to f ollo w t h e w arnings an d
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
1 . Do not insert the lock key into mower until it is
ready to be used.
2. Children should be supervised to ensure that
they do not play with the mower.
3. Never allow children or people unfamiliar with
these instructions to use the mower. Local
regulations can restrict the age of the operator.
4 . Never operate the mower while people, espe-
cially children, or pets are nearby.
5 . Keep in mind that the operator or user is
responsible for accidents or hazards occurring
to other people or their property.
6 . W hile operating the mower, always wear sub-
stantial footwear and long trousers. Do not
operate the mower when barefoot or wearing
open sandals. Avoid wearing clothing or jew-
elry that is loose fitting or that has hanging
cords or ties. They can be caught in moving
parts.
7. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer ' s responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.
8 . Operate the mower only in daylight or in good
artificial light.
9 . Avoid operating the mower in wet grass.
9 ENGLISH