Mounting Cut-Out - Bosch rexroth IndraControl PR4100 Manual

38/57
Mounting, demounting and electric installation

10.8 Mounting cut-out

①
Mounting cut-out
Fig. 10-21: Mounting cut-out
Display size
15"
21"
Tab. 10-3: Mounting cut-out in millimeters
Ensure the IP protection class:
Observe the tolerance specifications for the mounting cut-out!
●
Observe the wall thickness for the mounting cut-out! Minimum of
●
2 mm and maximum of 6 mm.
Consider the weight of the display and of the PC. Especially if
●
there is a strong vibration. Reinforce the front plate with slates at
the internal side close of the mounting cut-out if required.
Bosch Rexroth AG R911384699_Edition 03
IndraControl PR4 and VR4 Control cabi-
1
Width ②
412.40
Tolerance ±0.7
550.30
Tolerance ±0.7
net PC and panel PC
Height ③
261.70
Tolerance ±0.4
341.80
Tolerance ±0.4