Display And Controls; Pairing The Vicare Climate Sensor - Viessmann ViCare Operating Instructions Manual

Display and controls

A
Fig. 8
Status LED
A
Openings for temperature and humidity measure-
B
ment. Do not seal off.

Pairing the ViCare climate sensor

1. Remove the ViCare climate sensor from the wall.
2. Open the ViCare app and tap "Settings", "Indi-
vidual room control".
3. Follow the instructions in the app.
4. Scan QR code on the ViCare climate sensor.
D
B
Operating button
C
QR code
D
5. Pairing process
Confirm the pairing process by briefly pressing
operating button
minutes. During this time the status LED flashes
green.
If pairing was successful, the status LED shows
green for about 5 seconds. The ViCare app dis-
plays the successful connection.
6. Put the ViCare climate sensor back on the wall.
Commissioning
C D
. Pairing can take up to 3
C
13