Table 88: Qfx3500 Chassis Alarm Messages - Juniper QFX Series Manual

Table 88: QFX3500 Chassis Alarm Messages

Component Alarm Type
Fans Major (red)
Copyright © 2012, Juniper Networks, Inc.
CLI Message
Fan/Blower Absent
Fan Failure
Fan I2C Failure
Fan fan-number Not Spinning
Chapter 35: Alarms and System Log Messages
Recommended Action
The fan is missing. Install a fan.
Replace the fan and report the failure to
customer support.
Check the system log for one of the
following messages and report the error
message to customer support:
CM ENV Monitor: Get fan speed failed
Fan-number is NOT spinning @ correct
speed , where fan-number
or 3.
Remove and check the fan for
obstructions, and then reinsert the fan. If
the problem persists, replace the fan.
.
may be 1, 2,
443