Set Number Of Rings; Set Recording Time - VTech IS8151-1S User Manual

Set number of rings

You can set the answering system to answer an incoming call
after two, three, four, five or six rings. You can also select toll
saver. If toll saver is selected, the answering system answers a
call after two rings when you have new messages, and after
four rings when there are no new messages. This feature allows
you to check for new messages and avoid paying long distance
charges when calling from out of your local area. By default,
the answering system answers an incoming call after four rings.
To set the number of rings:
Using a cordless handset:
1. When the telephone is in idle mode, press
the main menu.
2. Press q CID or p to scroll to Answering sys, then press
SELECT.
3. Press q CID or p to scroll to Ans sys setup, then press
SELECT.
4. Press q CID or p to scroll to # of rings, then press
SELECT.
5. Press q CID or p to choose among 2, 3, 4, 5, 6 or Toll
saver.
6. Press SELECT to save the setting. You hear a confirmation
tone.
Using the telephone base:
1. When the telephone is in idle mode, press
the main menu.
SELECT to select Answering sys.
2. Press
3. Press q CID or p to scroll to Ans sys setup, then press
SELECT.
4. Press q CID or p to scroll to # of rings, then press
SELECT.
Press q CID or p to choose among 2, 3, 4, 5, 6 or Toll
5.
saver.
SELECT
6. Press to save the setting. You hear a confirmation
tone.
NOTES
• If you set the number of rings for the answering system as 2 or 3
rings, the caller ID announce feature may not have enough time to
announce the caller's full information.
• If Smart call blocker is on, the first ring of all incoming calls will be
muted.

Set recording time

You can set the recording time allowed for incoming messages.
The message length is three minutes by default.
To change the setting:
Using a cordless handset:
1. When the telephone is in idle mode, press
the main menu.
2. Press q CID or p
SELECT.
3. Press q CID or p
SELECT.
MENU to enter
4. Press q CID or p
SELECT.
5. Press q CID or p
minute, then press
confirmation tone.
Using the telephone base:
1. When the telephone is in idle mode, press
the main menu.
2. Press
Press q CID or p
3.
SELECT.
4. Press
Press q CID or p
5.
MENU
to enter
minute, then press
confirmation tone.
53
to scroll to Answering sys, then press
to scroll to Ans sys setup, then press
to scroll to Recording time, then press
to choose 3 minutes, 2 minutes or 1
SELECT to save the setting. You hear a
SELECT to select Answering sys.
to scroll to Ans sys setup, then press
SELECT to select Recording time.
to choose 3 minutes, 2 minutes or 1
SELECT to save the setting. You hear a
MENU to enter
MENU to enter