Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DSE RT Series
Summary of Contents for DSE RT Series
- Page 1 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 1 RT Series IP cameras Speed Dome PTZ IP ONVIF Installation and configuration manual How to connect the camera How to connect to the network and WiFi How to configure the camera...
-
Page 2: Contents Of The Manual
Contents of the manual The range of RT series cameras is a range of motorized IP cameras for wired or WiFi network connection. This manual explains how to connect the camera, how to make basic adjustments and how to configure the parameters for network connection. - Page 3 Internet Explorer browser. Normally these cameras connect to an NVR for recording. RT Series cameras fully support the international ONVIF protocol and are compatible with any IP recording software or network video recorder (NVR) capable of handling this standard.
-
Page 4: Installation
Page: 4 Installation CONNECTIONS The RT series speed dome cameras have only 2 connections: a mains socket and a 12VDC power plug, RJ45 NETWORK PORT - RJ45 FEMALE connector to connect the LAN network. This port is for • connecting to a network switch using a normal LAN cable. - Page 5 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 5 After connecting the camera, check that it performs an automatic rotation movement that certifies correct power supply. If the camera does not make any movement, check the power supply. If you connect the camera via cable, check that the switch LEDs corresponding to the port used start flashing.
-
Page 6: Mounting The Camera
INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 6 MOUNTING THE CAMERA Cameras supplied with a wall bracket must be fixed to the wall with the supplied mounting bracket. The connecting cable comes out through the bracket. The cable entry can be provided in the center of the bracket if the cable passage is walled up. - Page 7 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 7 Note that in the presence of more people present in the frame, the camera will tend to follow the largest detection in size. It is not convenient to enable human detection in places with frequent presence of people.
- Page 8 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 8 Quick WiFi configuration via APP - Only for WiFi versions If you have purchased a wifi model you can connect it to your WiFi network very easily using the app P6SLITE which you can download for iOS and Android.
- Page 9 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 9 4 - Press the ADD DEVICE button in the middle of the screen, or press the + button at the top right and then choose ADD A WIFI DEVICE. At the beginning of the procedure you are reminded to power up and reset the camera in order to continue.
- Page 10 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 10 5 - Choose to use the scan code distribution network (first option) 6 - Choose the wifi network you want to connect the camera to and enter the wifi network access password.
- Page 11 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 11 7 - Show the camera the QRcode that appears in the app by holding the phone about 15 centimeters from the camera lens until you hear the confirmation sound signal...
- Page 12 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 12 CONNECT THE CAMERA TO THE WIFI AND ADD IT TO THE APP WITH THE CAMERA'S HOTSPOT (AP) In some zoom cameras it is not possible to show the application qr code to the camera and you must use the add mode using the camera hotspot.
- Page 13 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 13 At the beginning of the procedure you are reminded to power up and reset the camera in order to continue. Obviously there is no need to reset if the camera is new.
- Page 14 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 14 5 - Choose to use the AP hotspot distribution network (second option) 6 - Choose the wifi network you want to connect the camera to and enter the wifi network access password.
- Page 15 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 15 7 - Press the confirm buttons and connect to the camera's WiFi network, which starts with ZWAP. There access password is: 01234567. Make sure your phone maintains this connection even if it doesn't allow internet access.
- Page 16 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 16 The app now automatically proceeds to connect the camera to your WiFi. If the camera has a loudspeaker, a message in English warns you of the successful connection. Now the camera is connected to your wifi and you can manage it with the app, both locally and via the Internet.
- Page 17 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 17 DSE SRL - ITALY - WWW.DSE.EU...
- Page 18 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 18 WiFi configuration for local use in AP mode If you have purchased a wifi model, you can use it wirelessly even if you don't have a wifi network. In fact, the camera generates its own wifi network from the factory to which you can connect locally with your mobile phone to control the camera.
- Page 19 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 19 2 - Open the APP. You will not be able to login because at this moment your phone has no Internet connection, press CONNECTION HOTSPOT and wait for the connection This direct camera connection mode works only locally.
- Page 20 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 20 Factory reset for WiFi network change If you have made a wifi connection to one network and now want to connect to another network you can restore the factory configuration by holding the reset button for a few seconds. The camera restarts and returns to factory AP mode, disconnecting from the local network and generating its own wifi network.
-
Page 21: Wired Network Configuration
IP address 192.168.1.110. EASYTOOL SOFTWARE In the download area of our site, by searching among the IP cameras, RT Series, you can download the software Easytool for Windows that you need to install on any PC on the network. The function of this software is to detect the presence of the camera on the network, whatever its address, and to allow you to change the address of the camera in order to make it consistent with your network. - Page 22 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 22 Type IPCONFIG in the command prompt and press ENTER. The TCP / IP parameters will appear. The second line is the IP address assigned to your computer. In the example above, the address of the PC you are working on is 192.168.2.3 and the subnet mask used is the classic 255.255.255.0.
- Page 23 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 23 All cameras support automatic IP address assignment by a DHCP server. However, this mode is not recommended as in case of network failure or equipment restart it is possible that the cameras change IP address making it necessary to reconfigure the NVR.
- Page 24 RT SERIES IP SPEED DOME CAMERAS Page: 24 The program will start searching for the RT series IP cameras present on the network. Wait for the search to complete. EASYTOOL is also able to detect cameras with an address class different from that of the PC on which you are working.
- Page 25 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 25 DSE SRL - ITALY - WWW.DSE.EU...
- Page 26 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 26 Access with browser Once the network parameters have been set correctly, the first access to the camera can be made using the INTERNET EXPLORER browser. Internet Explorer is no longer used in internet browsing, but remains the reference browser in CCTV due to the management of activeX add-ons.
- Page 27 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 27 ActiveX especially those NOT marked as safe. It is possible to set the items indifferently on ENABLE or ASK FOR CONFIRMATION. Finally save and restart the browser. ENTER THE ADDRESS IN THE BROWSER To access the camera with the browser, type in the address box, the IP address you have assigned to it.
-
Page 28: Activex Installation
ACTIVEX INSTALLATION To be able to make the RT series IP cameras viewable on the browser it is necessary to install the ActiveX components. The first time you log in, the system will detect the lack of these components in your computer and offer you to download them. - Page 29 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 29 The commands in the window are described in detail below. DSE SRL - ITALY - WWW.DSE.EU...
- Page 30 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 30 WiFi configuration from PC If you have purchased a camera with WiFi you can connect it to your wireless network and use it wirelessly. These cameras have a simplified wifi connection procedure via APP which has already been explained in the manual.
- Page 31 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 31 3 - Select the WiFi network you want to connect to 4 - Enter the password to access the WiFi network in the KEY box DSE SRL - ITALY - WWW.DSE.EU...
- Page 32 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 32 5 - Click the CHECK button. The wireless status should show CONNECTED. The IP ADDRESS box will show the wireless IP address acquired by the camera. 6 - If you want you can move the address management from DHCP to Set Manually in order to keep the IP unchanged even in case of restart.
- Page 33 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 33 CONNECTION TO RKK SERIES WIFI NVR If you have our wifi NVR you can connect the WiFi cameras of this range wirelessly directly to the WiFi of the NVR, instead of to your home wifi. To do this, first you need to make the NVR network visible by selecting AREA EU in its WIFI settings.
- Page 34 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 34 DSE SRL - ITALY - WWW.DSE.EU...
- Page 35 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 35 Access with ONVIF NVR These cameras to be connected network video recorders (NVRs) or external recording software. To do this, the ONVIF standard is used, which these cameras fully support. To connect the cameras to NVR or ONVIF software please refer to the manuals of the recording equipment.
- Page 36 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 36 Add a camera already connected to the network to the APP If you have already connected the camera to your network, via cable or WiFi, you are ready to use the app, both within your network and via the Internet.
- Page 37 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 37 ATTENTION: A camera can only be uploaded to one account per privacy region. If you want to upload the camera to a different account you must first delete it from the previous account, or use the share option.
- Page 38 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 38 5 - Scan the QR code placed on the camera label DSE SRL - ITALY - WWW.DSE.EU...
- Page 39 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 39 6 - Enter the access credentials of the camera which by default are: admin | empty field 8 - Press ADD to complete The procedure adds the camera to the app. If this method of adding is not successful it is because the camera is not connected to the wifi network.
- Page 40 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 40 1 - Download the app and create a free account 2 - Connect the mobile phone to the wifi network. It will presumably be your router's wifi network. If you have a router with multiple frequencies, connect to the 2.4 GHZ network...
- Page 41 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 41 5 - Press the small blue search icon in the first DID line. The app will scan the network and detect the camera connected to the network DSE SRL - ITALY - WWW.DSE.EU...
- Page 42 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 42 6 - Enter the access credentials of the camera which by default are: admin | empty field 7 - Press ADD to complete DSE SRL - ITALY - WWW.DSE.EU...
- Page 43 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 43 Using the P6SLite APP These cameras are usually controlled via NVR with related apps. However, it is also possible to connect with the mobile phone directly to the camera using the app: P6SLITE which you can download for iOS and Android.
- Page 44 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 44 SETTINGS - Configure the camera operation options. Note that some options, such as enabling autotracking, can only be controlled via the APP and not from a computer. To start live viewing, tap the central play button...
- Page 45 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 45 QUALITY - Allows you to choose the video streaming to receive CAPTURE / SCREENSHOT - Capture an instant photo of the video and save it to the mobile PTZ -...
- Page 46 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 46 In the LIVE view there are 3 quick commands overlay From left to right: AUTOTRACKING (only telephones that support it) - This icon allows you to disable the autotracking function without having to enter the camera configuration. This icon only affects autotracking, not human detection or motion detection DAY / NIGHT - This icon allows you to select color, B&W or intelligent night vision without having to enter...
- Page 47 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 47 In this section of the manual we show the more specific configurations that can only be carried out from the app, while the other configurations you will find later, in the explanation of the connection from PC with the browser.
- Page 48 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 48 Humanoid settings - Activate and configure human presence detection and autotracking HUMAN DETECTION - Activates human detection in the camera HUMANOID TRACKING - Activates the autotracking function for tracking the subject SENSITIVITY - Adjusts...
- Page 49 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 49 HUMAN DETECTION AND AUTOTRACKING - POE models In the POE versions the human detection function is enabled via app or Internet Explorer browser while the autotracking function is configured via preset...
- Page 50 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 50 DSE SRL - ITALY - WWW.DSE.EU...
- Page 51 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 51 POE VERSIONS - ENABLE AUTOTRACKING VIA PRESET In the POE versions, autotracking is enabled not via the app, but with special system presets that also allow for a more refined programming of the tracking. You can enable autotracking on a fixed zone or while cruising between various presets.
- Page 52 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 52 RECALL 60 + RECALL 61 RECALL 60 Set automatic return from tracking after 10 seconds Set + RECALL 62 RECALL 60 + RECALL automatic return from tracking after 15 seconds Set automatic...
-
Page 53: Push Notifications
INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 53 In the POE models you can also enable the sound alarm from Internet Explorer browser, but the recording of the personalized message must still be performed via the app. PUSH NOTIFICATIONS If you want you can receive immediate notifications on your phone when the camera detects intrusions. - Page 54 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 54 DSE SRL - ITALY - WWW.DSE.EU...
- Page 55 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 55 Live viewing from browser In the previous pages we have explained how to access the cameras with the PC using the Internet Explorer browser If you have not yet logged in with the browser to your camera, it is advisable to go back to the manual above and follow the instructions to connect successfully.
- Page 56 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 56 The Internet Explorer interface window is divided into tabs that can be chosen with the tabs at the top. PREVIEW - LIVE view and control of camera movements. PLAYBACK - Playback...
- Page 57 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 57 HD SD1 - The camera is able to manage 2 video streams. In this box you decide which video stream to receive in the browser among the 2 available: - HD - It is the main video stream normally used in connection on the internal network...
-
Page 58: Ptz Control
INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 58 DIGITAL ZOOM - If you activate this button you can draw a frame with the mouse to zoom in on a particular. Disable the function to return to normal viewing. -
Page 59: Automatic Movements
Page: 59 At the top you can adjust the rotation speed of the camera, if your model supports this function. Like all speed dome cameras, the RT series models can also perform automatic movements. AUTOMATIC MOVEMENTS For these cameras there are different types of automatic movements: PRESET - Pre-positions are predefined camera positions characterized by a precise value of X / Y •... -
Page 60: System Preset
INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 60 SYSTEM PRESET For RT cameras there are some special reserved presets that you can recall to perform particular functions PRESET POE CAMERAS WIFI CAMERAS SET DAY / NIGHT AUTO SET DAY / NIGHT ON B / W SET DAY / NIGHT ON COLOR IR FORCE MAX. - Page 61 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 61 DSE SRL - ITALY - WWW.DSE.EU...
- Page 62 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 62 Advanced configuration from browser The camera operating options can be configured via the Internet Explorer browser. However, note that some specific functions, such as enabling autotracking, can only be performed from the APP.
- Page 63 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 63 The OSD table allows you to define overlays in the image OSD - It is possible to give a name to the camera (IPC factory). Eventually you can also add lines with the + button.
- Page 64 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 64 The PICTURE table allows you to adjust the camera sensor NIGHT VISION MODE - You can decide whether to use the IR LEDs (normal vision in B / W) or the white LEDs (color vision).
- Page 65 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 65 The PRIVACY table allows you to mask parts of the image to protect the privacy of third parties. You can draw up to 4 boxes by dragging the mouse. To use the privacy masks, the camera must be kept still.
- Page 66 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 66 The TCP / IP page includes the camera's wired network data IP TYPE: The cameras support both manual IP address assignment and automatic assignment by a DHCP server on the network. The latter is generally not used because it could cause the camera address to change over time.
- Page 67 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 67 WIFI The WIFI page includes the network data of the camera's WiFi interface. You can search for a wifi network and connect using the Inquiry button. As a rule, it is advisable to let the camera receive the parameters from the network in DHCP and then possibly select a fixed address at a later time in order to prevent the camera from changing its address over time.
- Page 68 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 68 Here you can change the ports used by the camera for network communication. Do not modify these ports except for real necessity. PPPoEE Here you can set the PPPoE protocol for direct control of an ADSL modem.
- Page 69 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 69 Here you can set the parameters for sending emails that you can test with the TEST button. You can enter 3 recipient addresses and specify a Subject (Theme) and the content of the email. You can also attach the photo (additional) and set a delay between consecutive emails to avoid sending too many emails.
- Page 70 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 70 The cameras can upload images to a website via the FTP protocol following alarms. It is possible to indicate the address of the FTP server with the access credentials, the port and the folder.
- Page 71 IP address that the camera has at that moment. The RT Series cameras support the most popular DDNS services and are able to periodically send the Internet IP address assigned to them to the DDNS provider. Remember that if you use a DDNS server you will have to map the ports used by the camera in the router configuration, which is not necessary if you use the app or software with the cloud server.
- Page 72 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 72 RTSP If you want you can connect to the camera with external software via RTSP protocol. This page indicates the RTSP port and the syntax that you must enter in the reader. Here for example you can see how to set...
- Page 73 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 73 A P2P server is used to connect via the Internet with the app or with the EasyVMS software. On this page you can scan the qr code of the camera serial and check if the server status is connected, which is essential for remote access.
- Page 74 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 74 Here you set the video compression settings used by the camera . The camera manages 2 streams: a MAIN STREAM (main stream) and a SUB STREAM (secondary stream) less heavy for connection via internet. From the connected client it is possible to define which stream to use based on the available bandwidth.
- Page 75 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 75 CONTROL - You have the possibility to choose between two different modes of management of the occupied band: CONSTANT BIT RATE (CBR) and VARIABLE BIT RATE (VBR). In CBR mode the camera maintains a constant Bit Rate which can be set in the box below. In VBR mode, on the other hand, the camera changes the bit rate in the various operating conditions in order to maintain a constant video quality that you can set in the box below.
- Page 76 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 76 REGISTRATION Here you set the recording settings on the internal SD card that you can insert into the camera VIDEO TYPE - You can decide to record the high resolution video (Main Stream) or the lighter one (Sub stream) on the SD card.
- Page 77 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 77 MOTION The camera manages motion detection so it can trigger alarm actions if pixels move within the shot. To use this function, you need to keep the camera still. Here you set the motion detection settings MOTION - You can enable or disable the motion function.
- Page 78 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 78 The camera manages human detection so it can trigger alarm actions if it detects the presence of a person inside the shot. This feature is different from normal motion detection because it only detects the human figure and not other types of motion.
-
Page 79: Acoustic Alarm
INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 79 INSERTION - In the insertion table you can enable the detection according to the time of day, based on a weekly calendar. ACOUSTIC ALARM Here you can configure the acoustic signal through the camera speaker (if present) to be activated in case of motion detection or human detection. - Page 80 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 80 Here you can configure the time of the camera. DATE FORMAT - Select DD-MM-YY if you want the date in Italian format FORMAT NOW - Select 12 or 24 hours EQUIPMENT - Here you see the current date and time stored in the camera.
- Page 81 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 81 USERS Here you can configure the passwords for accessing the camera. Factory find the admin user with blank password which is the factory login password. You can add 5 more users.
- Page 82 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 82 Here you can configure the periodic capture of a frame at regular intervals, a feature also called Time Lapse. You can set the saving of photos on SD card or sending via FTP to update a web page.
-
Page 83: Ptz Setting
INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 83 Here you can see the camera information PTZ SETTING Not used on these models DISK DSE SRL - ITALY - WWW.DSE.EU... -
Page 84: Activation Code
INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 84 In this section you can manage the internal SD memory of the camera which you can insert in the appropriate slot behind the external door of the camera. Once the SD card has been inserted, you must format it with the FORMAT button so that it can be managed by the camera. -
Page 85: Default Reset
INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 85 It allows you to program the automatic restart of the camera on an hourly or weekly basis UPDATE Allows you to update the camera firmware. This operation is to be carried out only on the advice of our technical service. - Page 86 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 86 Allows you to restore the factory configuration of the camera You can perform a simple reset that doesn't change network settings or a hard reset that restores the factory IP address. You can also perform this reset using the hardware RESET button on the camera.
- Page 87 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 87 Browser playback With the browser you can play both the videos recorded in the SD card of the camera (REMOTE), and the videos saved on the PC with the recording button (LOCAL) You can search by date and time and by pressing the find button you will see the recordings appear in the timeline bar at the bottom, marked by different colors based on the type.
- Page 88 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 88 You can define the storage folder of photos and videos where you will save the data you acquire by pressing the Capture and REC buttons in live view. You can also define the duration of the video files, while the PRV saving format is fixed it plays only with this player.
- Page 89 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 89 EasyVMS PC software In addition to access with the Internet Explorer browser, you can use the EasyVMS software to control your camera from a computer, both on a local network and via the Internet, through the cloud server.
- Page 90 At the first start the device management page opens automatically. In the lower window the program shows all the RT series cameras that have been detected in the local network. You can simply select the cameras and press ADD BATCH to add the cameras to the schedule. You are prompted for the password to access the camera, which is blank at the factory.
- Page 91 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 91 CONNECT EASYVMS TO YOUR P2P ACCOUNT If you have created your own P2P server account with the P6SLite app, you can link your account to this software. This way you will be able to reach your equipment via the Internet via computer. To do this, press the CLOUD ACCOUNT MANAGEMENT button and enter your credentials.
- Page 92 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: ninety two EasyVMS can simultaneously manage both local cameras in the network and the cameras via web connected to your account in the P2P cloud. It allows you to view live, PTZ control, playback and configure camera options.
- Page 93 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 93 DSE SRL - ITALY - WWW.DSE.EU...
- Page 94 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 94 DSE SRL - ITALY - WWW.DSE.EU...
- Page 95 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 95 OSD menu (POE cameras only) In the POE versions only, calling PRESET 95 opens the camera configuration menu that allows you to operate all the configurations that are performed from the browser plus various advanced settings.
-
Page 96: Camera Menu
INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 96 IR DISPLAY - Allows you to set advanced parameters of the IR illuminator GUARD TOURS - Sets 1-2-3 tours with dwell time and travel speed AB SCAN - Sets the scan between limit... - Page 97 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 97 Set the overlays in the image: Pan / Tilt angle, Action in progress, Camera ID, Communication parameters DSE SRL - ITALY - WWW.DSE.EU...
- Page 98 Page: 98 Connect with an RTSP client RT Series cameras support the RTSP protocol which is factory set to use port 554. It is possible to connect to the camera using any RTSP player such as VLC. The address to be called must have the following syntax:...
- Page 99 INSTALLATION MANUAL RT SERIES IP SPEED DOME CAMERAS Page: 99 DSE SRL - ITALY - WWW.DSE.EU...
Need help?
Do you have a question about the RT Series and is the answer not in the manual?
Questions and answers