Husky HD00120 Use And Care Manual

Husky HD00120 Use And Care Manual

Low profile floor jack

Advertisement

USE AND CARE GUIDE
3 TON LOW PROFILE FLOOR JACK
WITH SPEEDY LIFT
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
continually create quality products designed to enhance your home. Visit us online to see our full line of products
available for your home improvement needs. Thank you for choosing Husky!
THANK YOU
Item #1001 573 538
Model #HD00120

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HD00120 and is the answer not in the manual?

Questions and answers

Summary of Contents for Husky HD00120

  • Page 1 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM THANK YOU continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Husky!
  • Page 2: Table Of Contents

    Contact the Customer Service at 1-888-HD-HUSKY or visit www.huskytools.com.
  • Page 3: Pre-Operation

    Pre-Operation BEFORE ASSEMBLY AND OPERATION Compare all parts with the Package Contents lists in this manual. If any part appears missing or damaged, do not use this product. Contact the Customer Service at 1-888-HD-HUSKY or visit www.huskytools.com. SPECIFICATIONS Model Jack Dimensions...
  • Page 4: Jack Operation

    Jack Operation Inserting the handle Placing the vehicle in park □ □ Insert the handle (B) into the handle socket of Place the vehicle in PARK and apply the the jack (A). Ensure the pin on the lower end of emergency brake.
  • Page 5: Tool Set Up

    Add high grade hydraulic fluid into the Fill Screw slowly until the oil reaches the top of the oil fill hole. Replace the Fill Screw. NOTE: Do not touch the handle when adding hydraulic oil. HUSKYTOOLS.com Please contact 1-888-HD-HUSKY for further assistance.
  • Page 6: Care And Cleaning

    Care and Cleaning INSPECTION Maintain the product according to these instructions. You may not alter this product in any way. 1. Before using, inspect the jack thoroughly. Look for cracks in the welds, bent, damaged, loose, worn or missing parts. 2.
  • Page 7: Troubleshooting

    After the jack is repaired: Test it carefully without a load by raising and lowering it fully, checking for proper operation, BEFORE RETURNING THE JACK TO OPERATION HUSKYTOOLS.com Please contact 1-888-HD-HUSKY for further assistance.
  • Page 8: General Operation

    General Operation LIFTING WARNING: Park vehicle on a flat, level, solid surface safely away from oncoming traffic. Turn off the vehicle’s engine. Place the vehicle’s transmission in “PARK” (if automatic) or in its lowest gear (if manual). Set the vehicle’s emergency brake. Then, chock the wheels that are not being lifted.
  • Page 9: Exploded View

    Screw (M10x20) Hydraulic Unit Adaptor Washer (M10) Pin (A4x55) Bolt Retaining Ring (M25) Washer (M18) Lift Arm Shaft Retaining Ring (M12) Cover Plate Handle Socket Roller Saddle Handle Socket Saddle Screw Shaft Handle Bumper HUSKYTOOLS.com Please contact 1-888-HD-HUSKY for further assistance.
  • Page 10 Questions, problems, missing parts? Before returning to store, call Husky Customer Service 8 a.m.-7p.m., EST, Monday-Friday, 9 a.m.-6p.m., EST, Saturday Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 1-888-HD-HUSKY WWW.HUSKYTOOLS.COM...

This manual is also suitable for:

1001 573 538

Table of Contents

Save PDF