Table of Contents
Advertisement
Appliance parameters
Airways indicator
Lint should be removed after drying. In
addition, this indicator will remind you
to clean the filters when a certain
amount of lint has collected in them:
Clean the lint and plinth filters. See the
Operating Instructions for more informa-
tion.
You can decide at what level of lint
this reminder should be given.
Options
You will have an idea of how often this
should be done after a few drying pro-
grams.
- Off
This reminder does not appear. How-
ever, if there is a very severe block-
age in the ducting, the program will
be canceled and the fault message
Clean the lint filter. Check the airways.
will appear in the display regardless
of this option.
- Heavy
The reminder only appears when
there is a heavy build-up of lint.
- Normal (factory default)
- Delicate
The reminder appears when there is
only a small build-up of lint.
Conductivity
This setting is only relevant for regions
with very soft water.
Very soft water can result in unsatis-
factory drying results.
You should only select this setting if
the water used for washing the laun-
dry is extremely soft with a conduc-
tivity reading (electrical conductivity)
less than 150 μS/cm. Contact your
local water supplier for the conduc-
tivity level of your water supply.
Options
- Normal (factory default)
- low <150mS (only for regions with
very soft water)
Settings
97
Advertisement
Table of Contents
