Local Programming With Pc And Lcl-11A; Remote Programming With Comax Software (Upload/Download); Programming With A Keypad - Pima HUNTER-PRO Installation Manual

Hunter-Pro Installation Manual
26

3.1.2 Local programming with PC and LCL-11A

The LCL-11A is an interface between the HUNTER-PRO and a PC with COMAX
Upload/Download Software.
This feature provides fast, easy, and convenient programming. You can program the
parameters in advance and "upload" them after you complete the installation.

3.1.3 Remote Programming with COMAX Software (Upload/Download)

You can program the HUNTER-PRO over a telephone line with a PC, regular modem
supporting 300 bps, and the COMAX programming software. In addition to programming,
you also have access to the memory log. Please refer to the COMAX User Manual for
detailed information.

3.1.4 Programming with a Keypad

The HUNTER-PRO has two levels of programming; User Menu and Installer Menu. Enter
the Master Code (PIMA default 5555) to access the User Menu.
To enter the technician menu; enter the Master Code, then press
technician code (PIMA default 1234).
NOTE:
You cannot access the Installer menu without first going through the User menu. (i.e. without entering
the Master Code.)
IMPORTANT!
PIMA supplies the HUNTER-PRO with the following default codes:
Master Code:
Installer code:
We recommend that you change the codes after installing the system.
Once in the Installer menu, you can press one of the numbered keys to directly access
succeeding sub menus without going through the entire menu tree (Refer to section. 3.2).
COMAX
To PC Serial
(RS-232) Port
(COM1)
5555
1234
SERVICE
NEXT
, then enter the