Q Wakeup-On-Lan Header; R- Audio Modem Riser (Amr) Connector; Scpu Socket; Tcpu / System Fan Connector - Zida A694X User Manual

Q Wakeup-on-LAN Header
The Mainboard provides one Wakeup-on-LAN header used to
connect an add-in Network Interface Card which has Wakeup
capability.
r Audio Modem Riser (AMR) Connector
The Mainboard provides a AMR Connector for the AMR cards.
S CPU SOCKET
The Mainboard provides a 370-pin Socket370 CPU Socket for
Socket 370 processor. The CPU should have a fan attached to
it to prevent overheat. If a fan is not present, a fan should be
installed prior to turning the system on.
T CPU / SYSTEM FAN Connector
The recommended heatsinks for the processor are those
with 12 Volt three-conductor fans that can be connected to the
fan connector on the mainboard. It provides +12 Volts DC to
the CPU cooling fan as follows:
PIN
1
2
3
CAUTION! Be sure that sufficient air circulation is available across the
processor's heatsink by regularly checking that your CPU fan is
working. Without sufficient circulation, the processor could overheat
and damage both the processor and the mainboard. You may install
an auxiliary fan if necessary.
SIGNAL NAME
rotation speed signal
+12V
Ground
Mainboard User's Manual Page 43