Cap Frame - TAJIMA TFMX-C User Manual

1-20
Changing procedure of the frame
1.
Change of frame type
After the setting, the power will be turned OFF/
ON automatically.
2.
Frame origin memory
This operation makes the machine memorize the absolute origin of the embroidery
frame (X: 0.0, Y: 0.0).
Perform in the following conditions..
When the power is turned OFF in such a case as frame changing or there is a
possibility that the frame was moved in sleep mode
After installation of software
When frame (X/Y) driver is changed
When performing this operation, do not put your hands, etc. on
the machine table. You could be injured by moving frame.
1.
To call the screen ....................................................................................
List screen
F2
2.
To execute .........................................................................................End
This completes the working.
Example

Cap frame

! CAUTION
F2
List screen
or
9 Frame Origin Memory
Example: to perform
Select frame type you use.
When a memorized position of absolute origin is wrong, the
following problems will occur.
1. Frame position (frame coordinates) is not displayed
correctly.
2. The frame does not return to the interrupted position
even if power resume is performed.
Position of absolute origin (1)
It will become an anchoring point to calculate the current
frame position (Position differs depending on model).
X:
1
Y:
9 Frame Origin Memory
SET
F2
: Not to perform frame origin memory
: To perform frame origin memory
Selecting " " will cause warning buzzer to sound.
Pressing the "SET" will cause the frame to return to the
original position after moving to the absolute origin.
Switching the screen
E
Main screen . . . . . . . . . . . . .
A D2 F1 F6
Other setting • operation . . .
0.0
0.0
KY01