Dial-In User - Asus GigaX 2008EX User Manual

GigaX2008EX L2 Managed Switch User Manual
go through. If ʻAutoʼ is selected, the behavior of the selected port is controlled by
802.1x protocol. All ports should be set to ʻAutoʼ under normal conditions.
Guest VLAN: Specify a guest VLAN to clients that are not 802.1x-capable.
Click OK to make the settings effective permanently. Click Reload to refresh the
settings to current value.

4.7.2 Dial-In User

Dial-in User is used to define users in the local database of the switch.
User Name: New user name.
Password: Password for the new user.
Confirm Password: Enter the password again.
Dynamic VLAN: Specify the VLAN ID assigned to the 802.1x- authenticated clients.
Please click Add to add the new user. Click Modify when you have finished
the modifications. Click Remove when you want to remove the selected user.
Click OK to make the settings effective permanently. Click Reload to refresh the
settings to current value.
28
Figure 29. Port Access Control
Figure 30. Dial-In user