Installing The Access Management System; Installing An A8802Rs Access Controller - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Step 5 Loosen the three hexagon socket head cap screws on the bracket, adjust the
camera angle, and tighten the screws.
Figure 3-59 Adjusting the M2121 camera
----End

3.9 Installing the Access Management System

3.9.1 Installing an A8802RS Access Controller

Context
●
●
●
Procedure
Step 1 Mark the mounting holes using the access controller and marker, and drill holes
using a hammer drill.
Step 2 Unlock the access controller with the delivered key.
Issue 02 (2021-05-12)
The access controller can be wall-mounted. You are advised to install it in a
weak-current well.
If a twisted pair is connected between the access controller and the card
reader, it is recommended that the distance between them do not exceed 30
m.
Install double-door and quadruple-door access controllers by referring to this
section.
Copyright © Huawei Technologies Co., Ltd.
3 Installing Devices
53