Installing Usb-Drivers For Configuration - Elatec TWN3 Technical Manual

5.11 Installing USB-Drivers for Configuration

If the USB TWN3 reader is configured the first time, USB drivers for the configuration mode have to be
installed. Here are the steps to do so:
Once you have clicked the "Connect"-button within TWNConfig.exe the first time, the following
•
screen will appear:
Select to install the software from a specific source.
The following screen should appear:
•
Select the directory, where the drivers reside and click continue. The drivers will be installed
now.
After installation, the following screen should appear:
•
Elatec GmbH
Page 23 of 50