Page 1
Tri-Spec ® Max Output LED Lighting Instruction manual and set up guide LIFE SUPPORT FOR COLDWATER OR TROPICAL AQUARIUMS...
Page 2
Top tip…if the Tri-Spec 2 MO LED lighting unit is replacing a T8 unit not a Juwel style T5 unit, it may be necessary to create a new set of aquarium flap covers to fit correctly. Contact Interpet...
Page 3
Attach the retro fit brackets (3) lift both end tabs whilst push fitting the bracket firmly onto the aluminium heat sink (5). See diagram below. d. Place the Tri-Spec 2 MO system in the desired location under the hood and draw around the retro fit brackets (3) with a pencil to indicate their position.
Page 4
You can help protect the environment. Please remember to respect the local regulations: hand in non-working electrical equipment to an appropriate waste disposal centre. Consumer Advice contact details Interpet Ltd. Consumer Advice Department Vincent Lane, Dorking, Surrey RH4 3YX Fax: 01306 876712...
Need help?
Do you have a question about the Tri-Spec 2 and is the answer not in the manual?
Questions and answers