Removing The Belt Clip; Attaching The Universal Connector Cover; Removing The Universal Connector Cover - Mag One BPR 40d User Manual

Removing the Belt Clip

Procedure:
1 To remove the clip, press the belt clip tab away from the battery.
2 Slide the clip upwards and away from the radio.
3.5

Attaching the Universal Connector Cover

When and where to use:Replace the universal connector cover or dust cover when the universal
connector is not in use.
Procedure:
1 Insert the slanted end of the cover into the slots above the universal connector.
2 Secure the connector cover to the radio by pressing the cover inwards.
3.6

Removing the Universal Connector Cover

Procedure:
Remove the universal connector cover or dust cover by pulling the cover out.
MN007942A01-AA
Chapter 3 : Getting Started
13