ABLE OF ONTENTS Model Description............................... 1 Features ..................................1 Intended Use ................................1 Warranty ..................................1 Initial Setup ................................. 2 Quick Start................................3 Single Cycle Lock ................................ 4 Preset Lock ................................. 4 Setting or Modifying a Cycle ..........................4 Settings ................................5 Operation ................................
[Refer to the clinical laboratory method specified by the specimen receptacle manufacturer or established by the medical technology for the products applications.] ARRANTY Woodley Equipment Company warranties that this centrifuge is free from defects in workmanship and parts for 2 years. Woodley Equipment Company – +44 (0) 1204 669033 – sales@woodleyequipment.com | Page 1...
Turn on the power switch in the back of the centrifuge. E SURE THE ELECTRICAL OUTLET IS ALWAYS ACCESSIBLE AS THE LINE CORD IS THE MEANS OF EMERGENCY ISCONNECTION Woodley Equipment Company – +44 (0) 1204 669033 – sales@woodleyequipment.com | Page 2...
(Preset Lock). The Single Cycle Lock also prevents making changes to the parameters of the selected cycle. The Preset Lock allows selection of any saved cycle, but prevents changing the parameters of saved cycles. Woodley Equipment Company – +44 (0) 1204 669033 – sales@woodleyequipment.com | Page 3...
100 mm tubes. 125 mm tubes require the orange tube holder. If the tube holder selection in the program does not match the tube holder used, the RCF number displayed will not reflect the actual value. Woodley Equipment Company – +44 (0) 1204 669033 – sales@woodleyequipment.com | Page 4...
60 seconds have elapsed, press the UNLOCK button. The lid will unlock for another 15 seconds. o Turn the lid knob counterclockwise and open the lid. The lid light will turn off. Woodley Equipment Company – +44 (0) 1204 669033 – sales@woodleyequipment.com | Page 5...
Opposing tube holders must be equally loaded or empty or loaded with equally weighted samples. When loading only 3 tubes, they must be of equal weight. Woodley Equipment Company – +44 (0) 1204 669033 – sales@woodleyequipment.com | Page 6...
Setting or Modifying a Cycle. If the preset is not the desired length, follow the procedure on the same page to change the preset time. Woodley Equipment Company – +44 (0) 1204 669033 – sales@woodleyequipment.com | Page 8...
Page 12
Make sure that the screw in the centre of the rotor is tight. Clicking noise during braking gets loud o Tighten the centre screw on the lid hinge. Lid does not stay up Woodley Equipment Company – +44 (0) 1204 669033 – sales@woodleyequipment.com | Page 9...
Page 14
Product Family: Clinispin HORIZON Series (Clinispin HORIZON 6 Flex, 6 Flex FA) Complies with UL61010-1/CSA C22.2 No. 61010-1 and IEC61010-2-020 Protected by U.S. Patents #6,811,531, # 7,422,554, #D718,463, & #D734,489. Other Patents Pending RoHS FDA LISTED Compliant INSTRUCTIONS FOR DISPOSAL OF WEEE BY USERS IN THE EUROPEAN UNION This product must not be disposed of with other waste.
Need help?
Do you have a question about the Clinispin Horizon 6 Flex and is the answer not in the manual?
Questions and answers