Setting The Time; Operation; Weighing - Silvercrest Z31622B Operation And Safety Notes

ied
m-
After you have inserted the batteries, the scale switches auto-
e is
matically into the time mode
ries
switched into the time mode
LC display
pre-
ody
unts
if
Note: If you do not press another button within 60 seconds,
t . the set value stops to flash and the time is set.
4
cale.
part- If the scale is in the time mode
once to switch into the weighing mode.
ound
tery
1. Place the kitchen scale on a solid, flat surface.
100926_silv_Digitale Kuechenwaage_Content_IE_FI_SE_DK_BE.indd 11
Setting the time (Fig. A)
. In this event, skip the next two steps.
1
If the scale is in the weighing mode, press and keep pressed
the MODE button
the time mode
5
Press and keep pressed the TARE button
3 seconds to set the time.
Press the MODE button
Press and keep pressed the MODE button
the value-setting process.
Press the TARE button
minute value flashes.
Press the MODE button
Press and keep pressed the MODE button
the value-setting process.
Press the TARE button

Operation

Weighing (Fig. A)
Note: Shortly before the scale switches into the weighing
mode, the scale shows "HELO" in the display for 1–2 sec-
onds.
. As soon as the scale has
5
, the hour value flashes in the
5
for approx. 2 seconds to switch into
3
.
to set the desired hour value.
3
to confirm your setting. Then the
2
to set the desired minute value.
3
to confirm your setting.
2
, press the MODE button
5
for approx.
2
to speed up
3
to speed up
3
3
GB/IE 11
03.06.14 12:07