Table of Contents
Advertisement
4.2 IR Remote Controller – Operation
1.
Power-on initialization
When camera is powered on, power indicator is on, camera head will
rotate in horizontal and vertical direction automatically, and camera lens
will be zoomed to tele and wide direction simultaneously. After
pan/tilt/zoom self-checking completed, COM indicator will flash and keep
lighting finally, camera will be positioned to HOME position, COM
indicator keep lighting before the first command arrives from IR remote
controller or COM ports, after then, each flashing means one command
received.
If preset 1 is set, camera will be positioned to this preset automatically
after initialization.
2.
Pan/Tilt control
Press arrow buttons to change camera position, pressing arrow buttons
will make a small change in camera position, to make a quick or big
change in camera position, press and hold down those buttons.
3.
Focus control
Auto-focus is factory default, but user can change to manual-focus
easily by pressing [FOCUS+] or [FOCUS-] key, which will make focusing
operation. If user wants to back to auto-focus, press [*] key; if user wants
to back to manual-focus, press [#] key.
4.
Zoom control
Pressing [ZOOM-] or [ZOOM+] key will make zoom operation in wide or
tele direction, zoom in (tele) will get a close-up scene, and zoom out
(wide) will get a wider view.
15
Advertisement
Table of Contents
