D-CHECKER ADDENDUM
The Daikin D-Checker software is used for monitoring or recording operation data of
▪
inverter using a connection cable exclusive to D-Checker. Please use correctly by carefully
reading the instruction manual.
This software can monitor inverter sensor data (temperature, pressure) and actuator status
▪
(compressor, solenoid, etc.). Data/status items that are supported by this software differ
from model to model.
D-Checker gathers operating data from an inverter through a PCB connector on the
▪
outdoor unit.
Data monitoring/recording of multiple outdoor units is not supported.
▪
Note: The values shown in this addendum are intended for instruction purposes only.
▪
Please refer to product specific literature (IO Manual) for appropriate operation ranges for
current unit.
Installing D-Checker
Copy the latest version of D-checker software
1
▪
to any folder on PC.
Execute software
▪
2
Confirm you have latest version of software
▪
3
(Contact
TechSupport@daikincomfort.com
latest version).
Click on Options (F6)
▪
4
Select COM Port
5
▪
Select unit of measurement
6
▪
Select Sampling Rate (Recommend 5 sec)
7
▪
Enter Service Office (Your Name/Dept)
8
▪
Enter Responsible Person (Your Name)
9
▪
Press OK when Finished
10
▪
114
for
4
5
6
7
8
9
10
3
Need help?
Do you have a question about the DX17VSS B Series and is the answer not in the manual?
Questions and answers