Error Code Definition - BAFANG DP C01.CAN BUS User Manual

7.8 ERROR CODE DEFINITION

The display can show the errors of a pedelec. If an error is detected, one of the following error codes will be
displayed.
Note: Please read the description of the error code carefully. If you see the error code, restart the system first. If the
problem is not resolved, please contact your dealer.
Error Declaration
The throttle is not back in its correct
04
position.
05 The throttle has fault.
07 Overvoltage protection
Error with the hall sensor signal
08
inside the motor
09 Error with the Engine phase's
The temperature inside the engine
10 has reached its maximum protection
value
The temperature sensor inside the
11
motor has an error
Error with the current sensor in the
12
controller
Error with the temperature sensor
13
inside of the battery
Troubleshooting
Check the throttle can adjust back into its
correct position, if the situation does not
improve, please change to a new throttle.(only
with this function)
1. Check the connector of throttle whether
they are correctly connected.
2. Disconnect the throttle, If the problem still
occurs, please contact your retailer.
(only with this function)
1. Remove the battery.
2. Re-Insert the battery.
3. If the problem persists, please contact your
retailer.
Please contact your retailer.
Please contact your retailer.
1. Turn off the system and allow the Pedelec
to cool down.
2. If the problem persists, please contact your
retailer.
Please contact your retailer.
Please contact your retailer.
Please contact your retailer.
10 BF-UM-C-DP C01-EN Novmber 2019