Table of Contents
Advertisement
10 STOW THE MACHINE
Remove the battery pack before you store the charger
and disconnect the charger from power source .
11 TROUBLESHOOTING
PROBLEM
Charger doesn't
work. Charger shows
defective mode. (LED
flashes Red)
Charger doesn't
work. Charger shows
evaluation mode
(LED indicates Red
solid ON).
ELECTRICAL CONTACTS
COOLING AIR PORT
POSSIBLE CAUSE
SOLUTION
Battery pack
Try to remove and reinsert the battery pack in the charger.
or charger is
Try charging a different battery pack.
defective or
there is a bad
Unplug the charger and wait until the red LED goes out, then
connection
reconnect the plug to the power supply.
between the
battery pack and
Replace defective battery pack.
charger.
Battery pack is
Allow the battery pack to reach normal temperature.
either too hot, or
Charging will begin when the battery pack returns to
too cold.
35˚F(2˚C) and -100˚F(38˚C).
INDICATOR LIGHTS
POWER CORD
LED CHARGING
05
WALL MOUNTING HOLES
2-3/8 inch (60MM)
Advertisement
Table of Contents
Need help?
Do you have a question about the LITHIUM 24V and is the answer not in the manual?
Questions and answers