Diagnose Sys Lte-Modem Sim-Info; Diagnose Sys Lte-Modem Signal-Info - Fortinet FortiGate-FortiWiFi Operator's Manual

diagnose sys lte-modem
Software revision:
SKU:
FSN:
PRL version:
Modem FW version:
PRI version:
Carrier Abbr:
Modem Operation mode:
This command shows the information of the LTE modem. Not all the firmware revisions carry the software revision and
SKU ID. The fields are left blank if no values are assigned to them.

diagnose sys lte-modem sim-info

FortiWiFi-40F-3G4G # dia sys lte-modem sim-info
LTE Modem SIM card information:
Active Slot:
SIM state:
ICCID:
IMSI:
Country:
Network:
This command shows status of the SIM card. There are three SIM card detection states:
QMI_UIM_CARD_STATE_PRESENT
l
QMI_UIM_CARD_STATE_ABSENT
l
QMI_UIM_CARD_STATE_ERROR
l
The first two states are quite obvious, but the final state usually indicates the modem has trouble recognizing the
inserted SIM card.

diagnose sys lte-modem signal-info

LTE Modem signal information:
WCDMA:
RSSI:
ECIO:
LTE:
FortiGate-FortiWiFi 5.0 3G4G LTE Modem Operator's Manual
Fortinet Technologies Inc.
T.2.5.1-00478-9655_GENNCH_PACK-1
UF00227145031047
0x0000
00.00.00.00
000.000_000
AUTO-SIM
QMI_DMS_OPERATING_MODE_ONLINE
When the auto-sim feature is enabled, the modem firmware version and PRI version will
display as 0 instead of their actual values.
Slot 2.
QMI_UIM_CARD_STATE_PRESENT
89014103271134616653
310410113461665
United States
AT&T Wireless Inc.
In most cases, the error state happens because of loose SIM card contact with the card slot. It
can be fixed with a good-quality SIM card adapter.
-79
6
32