Charging Status Leds - PowerBase 577178 Instruction Manual

3 Green LED continuously lit
2 Green LED continuously lit
1 Green LED continuously lit
No LED lit
Charge the battery pack before operating when it is at medium or
low battery charging level.
i. Connect the battery pack to the battery charger.
ii. Insert the mains plug into the socket. The green charging
status LED light will flash. Once the battery pack is completely
charged, the green charging status LED is lit continuously,
indicating that the charging process is complete.
iii. Disconnect the charger from the mains and remove the
battery pack from the charger.
iv. Attach the battery pack back to the product.

Charging status LEDs

Red LED turns on
Green LED flashes
Green LED continuously lit
Red and green LEDs flashing
Red and green LEDs
continuously lit
LED
button
Red LED
Green LED
Red LED
Green LED
Battery pack fully charged
Battery pack 65% charged
Battery pack 35% charged
Battery is dead and needs to
be charged
Charger ready
Battery pack charging
Battery pack fully charged
Battery pack defect
Battery pack too cold or warm
21