Belkin F5U103 Installation Instructions

Windows me

Hide thumbs Also See for F5U103:

See also: User Manual , Installation Manual

Installation Instructions for the F5U103 in Windows ME

1. Insert the CD labeled "USB Serial Adapter Installation" into your CD drive (typically

drive D:\).

2. Insert the flat (type A) connector into an available USB port on your PC or USB hub

attached to your PC.

3. Insert the square connector (type B) into the USB Serial Adapter device.

You will see "Add New Hardware Wizard".

4. When asked "What do you want Windows to do?", select "Automatic search for a better

driver (Recommended)."

5. Click "Next>"...

The "Select Other Driver" window will appear... Choose the WIN98 folder.

Table of Contents

Do you have a question about the F5U103 and is the answer not in the manual?

Page 1 Installation Instructions for the F5U103 in Windows ME 1. Insert the CD labeled “USB Serial Adapter Installation” into your CD drive (typically drive D:\). 2. Insert the flat (type A) connector into an available USB port on your PC or USB hub attached to your PC.
Page 2 6. Select the “USB To Serial Converter” with a location that will show in the WIN98 directory… 7. With the “USB To Serial Converter” selected for the WIN98 directory click "OK"... Then files will be copied over to your hard drive. The "Add New Hardware Wizard"...
Page 3 Your Belkin Serial Adapter is now installed and configured for use with Windows® ME.