Download Print this page

ABB Record Plus FB100 Installation Instructions

Molded case circuit breaker

Advertisement

Quick Links

1
DEH41073 INSTALLATION INSTRUCTIONS
Record Plus TM FB100 Molded Case Circuit Breaker
Congratulations and thank you for choosing
TM
the Record Plus
family of current limiting
circuit breakers.
TM
Record Plus
circuit breakers are designed
to
provide
overload
protection to electrical distribution and
utilization equipment.
All units use integrated modular circuit
breaker technology to allow flexibility in a
broad range of applications.
TM
All Record Plus
circuit breakers are listed by
Underwriters Laboratories to UL489 stand-
ard and by the CSA Standard C22.2, No. 5.
TM
Record Plus
circuit breakers are designed
and manufactured to exceed our global
customers' high standards for performance,
reliability and quality.
Warning:
DANGER of Electrical shock or injury.
Ensure ALL electrical power supplies are "OFF"
before installing or removing any devices. The
breaker, trip unit or accessories, MUST ONLY be
installed and serviced by QUALIFIED personnel, see
NEMA publication Ab4.
Avertissement:
Danger contre les risques
d'électrocutions. S'assurer avant TOUTES
manipulations du disjoncteur que les différentes
sources d'alimentation sont en position «OFF». Les
disjoncteurs, unités de protection
ou accessoires doivent être installés par des
personnes qualifiées et habilitées. Lira NEMA publ
ication AB4.
and
short
circuit
TM
Record Plus
FB100 1 Pole, 2 Pole & 3
Pole
Caution:
This product is NOT suitable for use in
equipment not specifically designed to accept it .
Contact equipment manufacturer for possible
equipment modifications.
Important
: Cet appareil nedoit pas etre employe
dans un equipement non specialement adapte a
cet effet. Contactez le constructeur concernant les
possibles modifications a apport er a l'equipemen.

Advertisement

loading

Summary of Contents for ABB Record Plus FB100

  • Page 1 DEH41073 INSTALLATION INSTRUCTIONS Record Plus TM FB100 Molded Case Circuit Breaker Congratulations and thank you for choosing the Record Plus family of current limiting circuit breakers. Record Plus circuit breakers are designed provide overload short circuit protection to electrical distribution and utilization equipment.
  • Page 2 A. Unpack and inspect 70 -100A Lug Kit FCALK14 (FCOLK14 CU lug body ) Unpack the breaker or switch and inspect it for any Cu/Al wire, strip length- 0.40 - 0.45 in (10 – shipping damage. Insure the breaker has the proper ampere, voltage and interrupting ratings for the 11mm) application.
  • Page 3 D. Circuit breaker operation The breaker contact status is indicated by the handle TRIPPED position, and the positions are marked on either side of the handle escutcheon, clearly showing the status of the breaker contacts. ON and/or I indicate breaker is ON and OFF and/or O indicate breaker is OFF.
  • Page 4 Should further information be desired or should particular problems arise that are not covered sufficiently for the purchaser’s purposes, the matter should be referred to the ABB Company. The breaker is a sealed unit, which contains no user serviceable parts, tampering with seal will void warranty.