Installing The Handle; Reversing The Door - Wine Cell'R WC26SSTDZ5 Instruction Manual

Installing the handle
1. Move the door seal behind the handle with your finger. In some models, plastic caps
cover the screws; remove them to expose the screws.
2. Insert the screws into the pre-drilled holes in the handle.
3. Install the handle and tighten the screws.
4. Replace the seal and the door caps.
Reversing the door (WC26SSTDZ5/WC46SSTDZ5/ WC46SSTSZ5)
Before you start
Make sure the wine cabinet is level. Seal the shelves with tape to prevent movement during
the process. The door of this appliance can be installed to open on the left or right side. To
reverse the movement of your wine cabinet door and open it on the opposite side, please
follow the instructions and diagram below.
1. Open the door and unscrew the screws of the lower hinge.
7