Related Manuals for jcb JCB-20BLMS
Summary of Contents for jcb JCB-20BLMS
- Page 1 POWER TOOL INSTRUCTION & USER MANUAL JCB-20BLMS Original Instructions IM-20BLMS-EN Iss: 09/2019...
- Page 2 Warning! Risk of injury! Do not touch the moving saw blade! This mitre saw is equipped with a class 2 laser. Do not look into the laser beam EN 60825-1:2014 ≤ = 650nm JCB-20BLMS Instruction & User Manual...
- Page 3 The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. JCB-20BLMS Designation of the tool (20 - 20Vdc, BL - Brush less, MS -Mitre Saw) JCB-20BLMS...
-
Page 4: Table Of Contents
Adjustment of Stop for 45º Mitre Cut Bevel Cut 0-45º and TurnTable 0º Mitre Cut 0-45º and TurnTable 0-45º Limiting Cutting Depth Groove Cutting Changing the Saw Blade Maintenance, Transport and Storage WARRANTY STATEMENT GENERAL CERTIFICATE OF CONFORMITY JCB-20BLMS Instruction & User Manual... -
Page 5: General Power Tool Safety Warnings
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. JCB-20BLMS Instruction & User Manual... -
Page 6: Power Tool Use And Care
Use of any other accessories, or storing power tools. Such battery packs may create a risk of injury and fire. preventive safety measures reduce the risk of starting the power tool accidentally. JCB-20BLMS Instruction & User Manual... -
Page 7: Service
This will ensure that the safety of the power tool is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. JCB-20BLMS Instruction & User Manual... -
Page 8: Safety Instructions For The Mitre Saws
Ensure the mitre saw is mounted or placed on a level, firm work surface before use. A level and firm work surface reduces the risk of the mitre saw becoming unstable. JCB-20BLMS Instruction & User Manual... -
Page 9: Blade Guard
Let the blade reach full speed before GUARD OR SPRING ARE DAMAGED, contacting the workpiece. This will reduce FAULTY OR REMOVED. DOING SO the risk of the workpiece being thrown. IS HIGHLY DANGEROUS AND CAN CAUSE SERIOUS PERSONAL INJURY. JCB-20BLMS Instruction & User Manual... -
Page 10: Safety Instructions For The Handling Of Saw Blades
Prior to use, make sure that the saw blade meets the technical requirements of this electric tool and is properly fastened. Only use the supplied saw blade for cutting wood and plastic, never for the processing of metals. JCB-20BLMS Instruction & User Manual... -
Page 11: Charger Safety
To reduce risk of injury, only charge lack of experience and knowledge JCB rechargable batteries. The if they have been given supervision charger and battery packs are specifically or instruction concerning use of designed to work together. -
Page 12: Laser Radiation Warning
The laser may not be replaced with a different type of laser. Repairs of the laser may only be carried out by the laser manufacturer or an authorised representative. JCB-20BLMS Instruction & User Manual... -
Page 13: Component List
Moveable blade guard Fixed saw table Clamping device Stop fence Grip screw for clamping device 16a. Extension block for stop fence 16b. Set screw for extension block Workpiece support Locking screw for workpiece support Sawdust bag JCB-20BLMS Instruction & User Manual... - Page 14 Stop for cutting depth limiter ON/OFF switch for laser Upper saw blade guard Laser battery compartment Adjustment screw (90°) for Laser holder blade alignment Guide bar for moveable blade guard Spindle lock for saw blade changing JCB-20BLMS Instruction & User Manual...
-
Page 15: Technical Data
Laser Output <1mW LITHIUM ION BATTERY TECHNICAL DATA Charge Time Charge Time Charge Time Battery Battery Battery Voltage (Fast Charger: (Super Fast Charger: (Dual Charger: JCB- Code Size Capacity JCB-20VFC) JCB-20VSFC) 20DC) Small 1.5Ah 30 mins 20 mins 25 mins... -
Page 16: Noise Information
Try to keep emissions as low as possible, for example by limiting your working time. In this regard, all the operational cycle phases must be taken into consideration (such as the times when the tool is switched off or running idle). JCB-20BLMS Instruction & User Manual... -
Page 17: Operating Instructions
It is also imperative to observe the accident prevention regulations in force in your area. The same applies for the general rules of health and safety at work. JCB-20BLMS Instruction & User Manual... -
Page 18: Sawdust Bag
Fig.13 that the saw blade is fitted correctly. Moving parts must run smoothly. Fig.13 Only use the correct JCB designated battery pack for the power tool. Before laser use, remove battery cover (40) and insert two JCB AAA batteries (or similar) into the battery compartment. -
Page 19: Battery
Refer to the Battery Charge Level table below for battery charger status as indicated by LED lights. Unplug the charger from the power point and remove the battery from the charger. JCB-20BLMS Instruction & User Manual... -
Page 20: Assembly And Operation
(9). Checking and adjustment of perpendicular position of cutting fence (16) Ensure the turntable is set to 0° on the mitre scale and the machine head (4) is locked in the down position. JCB-20BLMS Instruction & User Manual... -
Page 21: Crosscut 90º Adjustment
(14) is 90°. Subsequently check the position of the angle indicator. If necessary loosen the indicator (19) using a Philips screwdriver, set to Fig.7 position 0° on the angular scale (18) and retighten the retaining screw JCB-20BLMS Instruction & User Manual... -
Page 22: Power Switch
(with the blade guard in place). Raising the blade higher reduces the number of teeth in the cut. It also increases the hook angle, which makes the blade more aggressive, so the cut’s quality decreases. JCB-20BLMS Instruction & User Manual... -
Page 23: Crosscut 90º And Turntable 0º
(1) after completing the cut; instead allow Before making the cut, check that no the machine head to move upwards slowly collision could occur between the extension whilst applying light counter pressure block (16a) and the saw blade (28). JCB-20BLMS Instruction & User Manual... -
Page 24: Crosscut 90º And Turntable 0-45º
Fix the turn table (14) in the 0° position. Loosen the locking adjuster screw(22) and use the handle (1) to angle the machine head (4) 45° to the left. 45° - position angle stop between the saw blade (28) and turn table (14). JCB-20BLMS Instruction & User Manual... -
Page 25: Bevel Cut 0-45º And Turntable 0º
Before making a cut, check that the Cut as described under section “Cross cut extension block (16a) and the saw blade 90° and turn table 0°”. (28) cannot collide. Undo the fastening bolt (23) JCB-20BLMS Instruction & User Manual... -
Page 26: Mitre Cut 0-45º And Turntable 0-45º
Do not attempt to perform this type of cut using wide (thick) blades or with a dado blade. Possible loss of control and injury may result. Fig.15 JCB-20BLMS Instruction & User Manual... -
Page 27: Changing The Saw Blade
Carefully clean the flange bolt (30), outer flange (31) and inner flange (33). Reverse the above procedure to asemble the new blade. Attention: Match the arrow direction on the Fig.18 blade with the arrow direction on the upper blade guard. JCB-20BLMS Instruction & User Manual... -
Page 28: Maintenance, Transport And Storage
If the tool will remain unused for any length of time, it should be stored in the original packaging. Store the tool in a dry, frost-free, well ventilated place with a temperature of no more than 40°C. JCB-20BLMS Instruction & User Manual... -
Page 29: Warranty Statement
In the unlikely event your JCB Power Tool is subject to a manufacturing fault within the warranty period, please contact the seller/retailer where the item was purchased. JCB Power Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions. - Page 30 JCB-20BLMS Instruction & User Manual...
-
Page 31: General Certificate Of Conformity
IEC 55014-2:2015 IEC 55014-1:2017 IDENTIFICATION DETAILS OF IMPORTER/US DOMESTIC MANUFACTURER CERTIFYING PRODUCT COMPLIANCE: Name: JCB Tools (Yellow and Black Tools Limited) Address: 55 Romsey Industrial Estate Romsey, SO51 0HR Tel no: +44 1794 834250 CONTACT INFORMATION OF INDIVIDUAL MAINTAINING RECORDS OF TEST RESULTS: Name: Tim Burgoyne, QA Technical Manager &...
Need help?
Do you have a question about the JCB-20BLMS and is the answer not in the manual?
Questions and answers