Logik LIW714W20 Instruction & Installation Manual page 15

INSTALLATION
2. Decide from which direction the cabinet door
will open.
3. Depending on the direction the cabinet door
will open and close, drill holes (hinge Ø 35
mm; screw Ø 2 mm) on the cabinet door
according to the markings and measurements
on the Door Drill Template.
4. Screw the hinges on the cabinet door using
screw A.
5. Screw the spacers on the cabinet door using
screw A.
6. Depending on the direction the cabinet door
will close, screw the magnets on the machine
using screw B.
Door Drill Template
Door open from left to right
Door Drill Template
Door open from right to left
2mm
35mm
11