4.0D version) ..........................8 1. STARTING THE ENGINE Vehicle equipped with Diego G3 / NEVO system normally starts on gasoline. Switching to gas fuel supply occurs automatically after obtaining the relevant parameters, selected during the calibration of the system, such as: •...
A - LED indicator of actual gas level in the tank B - switch for fuel type selection C - status LEDs (working state indication) Fig. 2.1 Diego G3 control panel. (blue or red LED - configurable into software) A - LED indicator of actual gas level in the tank...
(configurable option in the program). Gas system signaling Sequential gas injection system Diego G3 / NEVO / NEVO-SKY has the function of self- control, allowing to detect malfunctions of the gas installation. All errors are stored in the ul. Św. Teresy od Dzieciątka Jezus 103A 91-222 Łódź...
Gas injectors merged (lack of possibility of gas E026 mixture correction). ul. Św. Teresy od Dzieciątka Jezus 103A 91-222 Łódź Office: Aleksandra 24/26 93-418 Łódź KME Sp. z o.o. ● ● ● ● tel +48(42) 611 00 26 ●...
04-12-2019 Emergency start on gas In case of petrol fuel system failure installed Diego G3 / NEVO / NEVO-SKY system allows you to start the engine directly on the gas. In order to start the engine on emergency mode you should: 1.
– repeat the process before next refueling. ul. Św. Teresy od Dzieciątka Jezus 103A 91-222 Łódź Office: Aleksandra 24/26 93-418 Łódź ● ● ● ● KME Sp. z o.o. tel +48(42) 611 00 26 ● fax +48(42) 611 82 52 ● www.kme.eu ● NIP: 732-199-00-33 ●...
Need help?
Do you have a question about the Diego G3 and is the answer not in the manual?
Questions and answers