Rutland County Garden Furniture Double Pergola Assembly Instructions Manual

Before you commence the assembly process we recommend that you read these instructions thoroughly beforehand to
familiarise yourself with the assembly process and to also check that you have the correct components. If for any reason you
need assistance, you can find our contact details on the final page of these instructions.
We highly recommend that any assembly is carried out on an open flat, level surface if possible with sufficient space. You will
also require the assistance of at least 2 adults to complete assembly safely.
Please note: For a free-standing pergola you can remove up to 600mm from the bottom of each post prior to commencing construction.

Tools required:

Please Note: The components listed below are those required to build a Double pergola of 3M in size or larger. For the 2.4M
version the braces are 150mm shorter, there are only 3 rafters and 14 x 120mm coachscrews.
96 x 65mm 16 x 120mm
woodscrews coachscrews
4 x Pre-drilled end
4 x Runners
Rafters
Assembly Instructions
The Double Pergola
10mm socket, No2 Pozidriv screwdriver (or electric driver) , step ladder or
platform.

Components

32 x 70mm
4 x 750mm braces
coachscrews
4 x 650mm braces
1
4 x Posts 4 x Rafters