Velocity Sensitivity; The Factory Reset Command - Behringer U-Control UMX25 User Manual

U-CONTROL UMX25
4) Confirm your selection with
assignments either press the
button again.
Pressing the right-hand OCTAVE SHIFT button switches the
presets up by one number on the external sound module, pressing
the left-hand OCTAVE SHIFT button switches the presets down
by one number. Pressing both buttons simultaneously switches
back to preset 0 in the current bank.
Remember to assign the OCTAVE SHIFT buttons to an individual
MIDI channel if you do not want to use the GLOBAL CHANNEL
(see Chapter 4.2.2).
When using the stepwise search function, the
channel assignment involves both buttons.
Assigning an individual channel to one of the two
buttons is not supported.
c) Various controller functions:
Please note that the OCTAVE SHIFT buttons generate switch
controller information if assigned to a controller. They always
generate a value of 0 or 127.
Two exceptions: If you assign the OCTAVE SHIFT
buttons to controller CC 07 (Channel Volume), pressing
either of the two buttons generates the value 0. With
controller CC 10 (Panorama), the value generated by
pressing either of the buttons is 64.
Please note that when a controller has been
assigned, pressing both buttons simultaneously
has no effect.
1) Press the ASSIGN button and keep it pressed.
2) Press the one of the two OCTAVE SHIFT buttons to which
you want to assign a controller.
3) Release the ASSIGN button.
4) Press the number keys on the keyboard to enter the controller
number of your choice (as described in Chapter 4.2.1).
5) Confirm your selection with
assignments either press the
button again. In either case the ASSIGN LED goes out.
Remember to assign the OCTAVE SHIFT buttons to an individual
MIDI channel if you do not want to use the GLOBAL CHANNEL
(see Chapter 4.2.2).
12
. To discard your
button or the ASSIGN
The sensitivity of the UMX25 can be regulated so that the
velocity of the keys has an effect on the volume level.
1) Press the ASSIGN button and keep it pressed.
2) Use the number keys to enter the keyboard velocity (see
Table 4.1).
3) Release the ASSIGN button.
4) Confirm your selection with
assignments either press the
button again.
KEY
Table 4.1: Effect of RANGE definition on keyboard velocity
Please proceed as follows to reset all UMX25 settings to their
factory defaults:
1) Press the ASSIGN button and keep it pressed.
2a) Press both OCTAVE SHIFT buttons for a temporary
FACTORY RESET. All currently modified control elements
. To discard your
will be reset to their factory defaults. However, the USER
button or the ASSIGN
MEMORY remains as before and is not reset!
2b) Press
simultaneously for a complete FACTORY RESET: Now not
only the control elements of the FACTORY MEMORY but
also those of the USER MEMORY will be overwritten.
3) Release the ASSIGN button. The ASSIGN LED stays on.
4) Confirm your selection with
RESET the unit, either press the
ASSIGN button again.
4. OPERATION

4.2.10 Velocity Sensitivity

EFFECT ON KEY V ELOCITY
OFF: velocity value is f ixed to 110.
Change of key pressure has no ef f ect on
volume level.
SOFT: key pressure is very sensitive; low
velocity changes create high changes in
volume level
MEDIUM: key pressure is "normal"; (very)
hard hit notes are (very ) loud, (very) sof t
hit notes produce (very) low volume
HA RD: key pressure is more unsusceptible
compared to all other settings
bis invalid input

4.2.11 The FACTORY RESET command

keys ,
. To discard your
button or the ASSIGN
and
. If you do not want to
button or the