Sierra Designs Clip Flashlight 2 Pitching Instructions

Clip Flashlight 2 / Light Year 1
PITCHING INSTRUCTIONS
Congratulations on the purchase of your new Sierra Designs tent! In order to familiarize yourself with your new tent, we recommend
you "test pitch" it before embarking on your wilderness adventure.
PACKAGE INCLUDES: Tent Body, Rain Fly, 2 Poles, 4 Guy Cords, 9 Hex Peg Stakes, 1 Pole bag with attached stake bag.
STEP 1: Find an even
piece of ground; be sure
the area is clear of
debris. Lay out your tent
as shown. Stake the 4
corners (circled).
STEP 3:
Connect Tent Lite Hook to poles.
Tent Lite Hook
STEP 5: Connect the velcro loops on the underside of the fly
to the rear and front hoop poles. (6 total)
Velcro Loop
STEP 2: Assemble poles.
Insert long pole into
grommets at front of tent
and short pole into
grommets at rear of tent.
Short Pole
Long Pole
STEP 4: Lay the rain fly over the tent connecting the side-release
(SR) buckles at the rear of the tent. NOTE: clip the gray male SR
buckle to the gray female SR buckle and yellow to yellow to
ensure fly is put on correctly.
SR Buckle
STEP 6: Attach grommets/webbing on the sides of the
fly to the pole tips; adjust the tension locks. Stake out
the vestibule and rear. Admire your new tent!
Tension Lock