Sealey SB1 Quick Start Quide

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SafeTy
1.1. general
Read instructions before use
9
Indoor use only
9
do noT leave batteries in a discharged state. Before storage remove batteries.
8
1.2. baTTery SafeTy
Warning! To reduce the risk of burns or fire:
‰
do noT attempt to open the batteries.
8
do noT crush, puncture, short contacts or dispose of in fire or water.
8
do noT expose to temperatures above 60°C (140°F).
8
Recycle or dispose of used batteries as stipulated by local regulation.
9
If the electrolyte in the batteries gets on your skin or in eyes, rinse thoroughly with cool water and seek immediate medical attention.
9
2. inTroducTion
Stylish and modern sound bar is finished in a nicely painted anthracite grey. Can play your favourite music easily from your smart phone
or tablet either by wireless technology, AUX in via an AUX cable (1mtr AUX cable supplied) or even takes a micro SD card. (Micro SD not
supplied). 2 Channel sound bar includes a pair of 2" speakers and 1 vibrating diaphragm for added sound quality. Base is mounted on 2 sturdy
feet with high grip foam pads which helps dampen any vibration. Charges from a USB cable. (USB cable included).
3. SpecificaTion
Battery: ................................................................ 3.7V 1.5Ah
Charging Time: ..................................................................2hr
Model no: ....................................................................... SB1
nett Weight: ................................................................... 790g
Running Time (min): ..........................................................4hr
Speaker output: ......................................................RMS: 6W
4. operaTion
4.1. connecTionS
4.2. WireleSS connecTion
4.2.1. To pair the SB1 with your Smartphone or other Wireless
enabled device turn on the speaker. Enable the wireless
function on your smartphone or other wireless enabled device
and hit scan for SB1. When found choose it from the list.
If prompted to, input password, use password 0000. Once
successfully paired, select the SB1 from the list of paired devices
and select to connect.
© Jack Sealey limited
Soundbar WireleSS rechargeable
Sb1
Model no:
fig.2
Original Language Version
fig.1
Micro Sd Card
fig.3
SB1 Issue 2 (1) 04/04/19