ISTRUZIONI PER L'USO
La cassaforte si presenta all'utente con lo sportello aperto e pronta all'uso.
CHIUSURA E APERTURA
Apertura con codice da tastiera
1.
Per chiudere la cassaforte, l'utente deve tenere lo sportello premuto e e digitare sulla tastiera
un codice da 4 a 9 cifre seguito dal pulsante #. Questo codice può essere composto da zero
a nove cifre, a discrezione dell'utente.
2.
Per aprire la cassaforte, l'utente deve ridigitare lo stesso codice, sempre seguito dal pulsante
#. Una volta impostato il codice, se si digita una cifra sbagliata, premere il pulsante * per
cancellarla e digitare il codice corretto. È possibile modificare il codice segreto ogni volta che
la cassaforte è sbloccata.
Tastiera
AVVERTENZA! Se l'utente dimentica il codice e la cassaforte è chiusa, o se l'utente lascia la stanza
e la cassaforte viene chiusa, è possibile aprire la cassaforte utilizzando la chiave proprietario, la
chiave master o la chiave meccanica.
Apertura con chiave IB
Se l'utente ha dimenticato il codice personale e la cassaforte è chiusa, è possibile aprirla utilizzando
la chiave proprietario o la chiave master, procedendo come segue.
Posizionare la chiave proprietario o la chiave master sul ricevitore: si attiverà un segnale acustico
("beep"), il display visualizzerà la scritta "OPEN" e la cassaforte si aprirà.
Chiave proprietario
Chiave master (opzionale)
Sportello
Ricevitore
9
Ricevitore
Need help?
Do you have a question about the SAFE 10 E PLUS SMART and is the answer not in the manual?
Questions and answers
IndelB safe shows open and then error message after using the password and does not open the safe what should be done
I recently purchased a yacht with an indel B safe 10 E plus in the master state room. There are no keys and no codes to get in. How can I reprogram or get inside of the safe to use it for my own personal use?
If the Indel B SAFE 10 E PLUS SMART safe is locked and the user has forgotten the code, it can be opened using the Owner Key, the Master Key, or the mechanical key. If none of these keys are available, the safe must be reset. Pressing the RESET button will erase all stored keys and codes, allowing new ones to be set. If the safe runs out of battery, a 9V battery can be temporarily connected to the emergency contacts to power the safe and regain access.
This answer is automatically generated